Shop parts by
Bumper post with a 3/8" hex base and 8-32 bottom thread stud and 6-32 top.
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
Bumper post with a 3/8" hex base and 8-32 bottom thread stud and 6-32 top thread stud.
Reference:
02-4843 post
38-6552 rubber
Used on Williams INDIANA JONES and other pinball machines
Substitute for Williams DRACULA Mist Gate post 02-4342-1
Select manufacturer to view game compatibility
Rubber post sleeve 1-1/16" light blue
Rubber post sleeve 1-1/16" yellow
Rubber sleeve black 7/8 inch tapered USE 38-6552-1
Rubber sleeve black 1-1/16 inch tapered
Yellow bumper post rubber sleeve is 7/8" high.
Bumper sleeve is 1/4" ID x 1/2" OD x 7/8" high.
1/4 inner diameter x 7/16 inch outer diameter x 1-1/16 inch tall.
Super-Bands™ sleeve 7/8 inch clear
Super-Bands™ sleeve 7/8 inch yellow
Super-Bands™ sleeve 7/8 inch orange
Super-Bands™ sleeve 7/8 inch black
Super-Bands™ sleeve 1-1/16 inch clear
Super-Bands™ sleeve 1-1/16 inch yellow
Super-Bands™ sleeve 1-1/16 inch orange
Super-Bands™ sleeve 1-1/16 inch green
Super-Bands™ sleeve 1-1/16 inch blue
Super-Bands™ sleeve 1-1/16 inch red
Super-Bands™ sleeve 1-1/16 inch white
Super-Bands™ sleeve 1-1/16 inch violet
Super-Bands™ sleeve 1-1/16 inch black
2-3/16" overall length Bumper post with No.8-32 x 3/4" thread on bottom uses...
