Shop parts by
Super-Bands™ sleeve 1-1/16 inch black
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
Black gloss polyurethane Super-Bands™ bumper post sleeve is 1/4 Inner Diameter x 7/16 Outer Diameter x 1-1/16 inches tall (6.35mm ID x 11.113mm x 26.9875mm height).
Fits all of the following bumper post part numbers:
02-403602-4036-202-405702-4659-102-482902-484202-484302-493202-5140530-5057-00530-5332-01530-5332-02530-5332-03530-5332-04SM00145-05
and others.
Super-Bands™ are modern polyurethane bumpers and rings for pinball machines that play better and last longer than traditional rubber. Tested by professional pinball players and commercial operators, Super-Bands™ are proven to reduce maintenance and increase playability in all pinball machines. Super-Bands™ are carefully engineered to maintain the same rebound, or bounce, of traditional soft 45-durometer rubber that pinball designers and professional players prefer.
More Durable: Advanced customized polyurethane compound is more resistant to abrasion, ozone, and ultraviolet light than traditional rubber.
Replaces these factory part numbers:
Williams #23-6552-1
Sega / Stern / Data East #545-5009-00
Bumper post hex base 8-32 x 2 inch
Post - hex base 8-32 tap / 8-32 thread
Metal post with #8-32 thread stud top, #10-32 thread on bottom.
Metal post with hex base No.6-32 tap and No.10-32 thread on bottom.
Bumper post 10-32 x 2-1/4 inch
Bumper post 8-32 x 2-1/4 inch
Bumper post m-m 6-32 top /8-32 base studs
Post - coin toss
Bumper post with a 3/8" hex base and 8-32 bottom thread stud and 6-32 top.
Metal bumper post No.10
Metal post with round base 6-32 tap and 10-32 thread on bottom.
Bumper post 10-32 bottom stud
Metal post 8-32 bottom stud
Metal bumper post has 8-32 bottom and plain top and uses 23-6552 or 23-655...
Yellow bumper post rubber sleeve is 7/8" high.
Bumper sleeve is 1/4" ID x 1/2" OD x 7/8" high.
Bumper post 8-32 stud 6-32 tap
Rubber sleeve black 1-1/16 inch tapered
