Shop parts by
Super-Bands™ sleeve 7/8 inch yellow
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
Yellow gloss polyurethane Super-Bands™ bumper post sleeve is 1/4 Inner Diameter x 1/2 Outer Diameter x 7/8 inches tall.
Fits all of the following bumper post part numbers:
02-4036
02-4036-2
02-4057
02-4659-1
02-4829
02-4842
02-4843
02-4932
02-5140
530-5057-00
530-5332-01
530-5332-02
530-5332-03
530-5332-04
SM00145-05
and others.
Super-Bands™ are modern polyurethane bumpers and rings for pinball machines that play better and last longer than traditional rubber. Tested by professional pinball players and commercial operators, Super-Bands™ are proven to reduce maintenance and increase playability in all pinball machines. Super-Bands™ are carefully engineered to maintain the same rebound, or bounce, of traditional soft 45-durometer rubber that pinball designers and professional players prefer.
More Durable: Advanced customized polyurethane compound is more resistant to abrasion, ozone, and ultraviolet light than traditional rubber.
Better Control: Super-Bands™ have equal to or better tactile response than standard rubber and allow for great ball control by any skill level player
Vibrant Colors: High-gloss surface with deep translucent colors look great on any game.
Lower Maintenance: Super-Bands™ are less porous and wipe clean with a cloth. They don’t absorb dirt like traditional rubber.
Replaces these factory part numbers:
Williams No.23-6552-1
Sega / Stern / Data East No.545-5009-00
Metal post 8-32 bottom stud
Bumper post 10-32 bottom stud
Metal bumper post has 8-32 bottom and plain top and uses 23-6552 or 23-655...
Metal post with round base 6-32 tap and 10-32 thread on bottom.
Metal bumper post No.10
Bumper post with hex base with 8-32 threaded bottom with 6-32 top hole
Bumper post with a 3/8" hex base and 8-32 bottom thread stud and 6-32 top.
Post - coin toss
Bumper post m-m 6-32 top /8-32 base studs
Yellow bumper post rubber sleeve is 7/8" high.
Bumper sleeve is 1/4" ID x 1/2" OD x 7/8" high.
Bumper post 8-32 x 2-1/4 inch
Bumper post 10-32 x 2-1/4 inch
Metal post with hex base No.6-32 tap and No.10-32 thread on bottom.
Metal post with #8-32 thread stud top, #10-32 thread on bottom.
Post - hex base 8-32 tap / 8-32 thread
Bumper post 8-32 stud 6-32 tap
Bumper post hex base 8-32 x 2 inch
