Shop parts by
Super-Bands™ sleeve 1-1/16 inch white
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
White gloss polyurethane Super-Bands™ bumper post sleeve is 1/4 Inner Diameter x 7/16 Outer Diameter x 1-1/16 inches tall (6.35mm ID x 11.113mm x 26.9875mm height).
Super-Bands™ are modern polyurethane bumpers and rings for pinball machines that play better and last longer than traditional rubber. Tested by professional pinball players and commercial operators, Super-Bands™ are proven to reduce maintenance and increase playability in all pinball machines. Super-Bands™ are carefully engineered to maintain the same rebound, or bounce, of traditional soft 45-durometer rubber that pinball designers and professional players prefer.
More Durable: Advanced customized polyurethane compound is more resistant to abrasion, ozone, and ultraviolet light than traditional rubber.
Better Control: Super-Bands™ have equal to or better tactile response than standard rubber and allow for great ball control by any skill level player
Reference:
39-6556-24
Williams 23-6552-1
Sega / Stern / Data East 545-5009-00
JJP 25-006012-09
Metal post 8-32 bottom stud
Bumper post 10-32 bottom stud
Metal bumper post has 8-32 bottom and plain top and uses 23-6552 or 23-655...
Metal post with round base 6-32 tap and 10-32 thread on bottom.
Metal bumper post No.10
Bumper post with hex base with 8-32 threaded bottom with 6-32 top hole
Bumper post with a 3/8" hex base and 8-32 bottom thread stud and 6-32 top.
Post - coin toss
Bumper post m-m 6-32 top /8-32 base studs
Rubber sleeve black 7/8 inch tapered USE 38-6552-1
Rubber sleeve black 1-1/16 inch tapered
Yellow bumper post rubber sleeve is 7/8" high.
Bumper sleeve is 1/4" ID x 1/2" OD x 7/8" high.
1/4 inner diameter x 7/16 inch outer diameter x 1-1/16 inch tall.
Bumper post 8-32 x 2-1/4 inch
Metal post with hex base No.6-32 tap and No.10-32 thread on bottom.
Metal post with #8-32 thread stud top, #10-32 thread on bottom.
Post - hex base 8-32 tap / 8-32 thread
Bumper post 8-32 stud 6-32 tap
Bumper post hex base 8-32 x 2 inch
