Shop parts by
Super-Bands™ sleeve 7/8 inch clear
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
Clear gloss polyurethane Super-Bands™ bumper post sleeve is 1/4 Inner Diameter x 1/2 Outer Diameter x 7/8 inches tall.
Super-Bands™ are modern polyurethane bumpers and rings for pinball machines that play better and last longer than traditional rubber. Tested by professional pinball players and commercial operators, Super-Bands™ are proven to reduce maintenance and increase playability in all pinball machines. Super-Bands™ are carefully engineered to maintain the same rebound, or bounce, of traditional soft 45-durometer rubber that pinball designers and professional players prefer.
Durable: Advanced customized polyurethane compound is more resistant to abrasion, ozone, and ultraviolet light than traditional rubber.
Better Control: Super-Bands™ have equal to or better tactile response than standard rubber and allow for great ball control by any skill level player
Vibrant Colors:
Lower Maintenance: Super-Bands™ are less porous and wipe clean with a cloth.
Replaces these factory part numbers:
Williams No.23-6552-1
Sega / Stern / Data East No.545-5009-00
Reference
39-6552-13
Bumper sleeve is 1/4" ID x 1/2" OD x 7/8" high.
Yellow bumper post rubber sleeve is 7/8" high.
Metal bumper post has 8-32 bottom and plain top and uses 23-6552 or 23-655...
Metal post 8-32 bottom stud
Bumper post 10-32 bottom stud
Metal post with round base 6-32 tap and 10-32 thread on bottom.
Metal bumper post No.10
Bumper post with hex base with 8-32 threaded bottom with 6-32 top hole
Bumper post with a 3/8" hex base and 8-32 bottom thread stud and 6-32 top.
Post - coin toss
Bumper post m-m 6-32 top /8-32 base studs
Bumper post 8-32 x 2-1/4 inch
Metal post with hex base No.6-32 tap and No.10-32 thread on bottom.
Metal post with #8-32 thread stud top, #10-32 thread on bottom.
Post - hex base 8-32 tap / 8-32 thread
Bumper post hex base 8-32 x 2 inch
Bumper post 8-32 stud 6-32 tap
