Flat Rate Shipping: $9.99+
48 Hour Shipping
CALIFORNIA WARNING: This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
3 terminal, dual winding Williams flipper coil with quick connect terminals. These wider male terminals accomodate the cables with female slide-on connectors on late model Williams and Bally machines. For machines without slide terminals on flipper coil wires, use the FL-15411.
Williams / Bally pinball machines flippers are designed for a balance of power based on the layout of a given game. Always use the specified coil number for your machine. Before changing to a different strength coil, always install a flipper rebuild kit. But, if you must adjust flipper strength, here is a list of coil numbers and their relative strength from weakest to strongest:
FL1-11753 Yellow - Used with short flippers and close shotsFL1-11722 Green - Used for close shots near drop targetsFL1-11630 Red - The standard, most commonly used coilFL1-15411 Orange - Used for long playfield shotsFL1-11629 Blue - Used for long shots and high ramps
All coils include new sleeves (coil tubing) where applicable.
Reference:
FL1-15411
