Shop parts by
3 terminal, dual winding Williams flipper coil with quick sonnect terminals.
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
3 terminal, dual winding Williams flipper coil with quick connect terminals.
These wider male terminals accommodate the cables with female slide-on connectors on late model Williams and Bally machines. For machines without slide terminals on flipper coil wires, use the FL-11629.
Williams / Bally pinball machines flippers are designed for a balance of power based on the layout of a given game. Always use the specified coil number for your machine. Before changing to a different strength coil, always install a flipper rebuild kit. But, if you must adjust flipper strength, here is a list of coil numbers and their relative strength from weakest to strongest:
FL1-11753 Yellow - Used with short flippers and close shots
FL1-11722 Green - Used for close shots near drop targets
FL1-11630 Red - The standard, most commonly used coil
FL1-15411 Orange - Used for long playfield shots
FL1-11629 Blue - Used for long shots and high ramps
All coils include new sleeves (coil tubing) where applicable.
Reference:
FL1-11629
03-7066-5
Select manufacturer to view game compatibility
3 terminal, dual winding flipper coil with 1N4004 diodes used on Williams, Bally, Jersey Jack, & Chicago Coin Gaming.
3 terminal, dual winding Williams flipper coil with quick connect terminals.
3 terminal, dual winding Williams flipper coil with quick connect terminal...
2-3/16 x 1/2 inch coil sleeve. Replaces 545-5388-00
2-3/16 x 1/2 inch coil sleeve. Replaces 545-5388-00
3 terminal, dual winding Williams flipper coil with quick connect terminal...
REVENGE FROM MARS (Bally) Coil sleeve kit
3 terminal, dual winding Williams flipper coil with quick connect terminal...
GETAWAY (Williams) Coil sleeve kit
