PopBlast™ LED module wedge red
PopBlast™ LED light modules for pinball machine pop bumpers add pizazz to your pinball playfield.
These easy to install LED light boards are an exciting addition to any pinball machine
Order #05-PB555-X (X is your color choice) to replace #555 bulbs and #05-PB44-X to replace #44 or #47 lamps.
Simply take the pop bumper cap off, remove the old lamp, plug in the PopBlast™ board and experience an enhanced light show from your playfield.
The top side of the PopBlast™ module has 6 side lighting and 1 centered LEDs that adds flare to any translucent pop bumper cap.
The bottom of the board has 4 LEDs to illuminate the pop bumper body.
The module runs on 6.3 volts AC or DC making it suitable for any manufacturer's machine.
The current consumption of .152 amps and power consumption of .96 watts is about 40% less than a traditional #555 or #44 incandescent bulb
The boards measures 38mm in diameter and is about 2mm thick.
The PCB connects to a 555 or 44/47 lamp socket base with appropriate plug and flexible wire.