Shop parts by
PopBlast™ LED ring 70mm bayonet green
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
NEW!
PopBlast™ LED light modules for pinball machine pop bumpers add pizazz to your pinball playfield.
These easy to install LED light boards are an exciting addition to any pinball machine. Fits neatly beneath any 03-8254-XX, 03-9007-XX, 03-7444-X, 13A-12-X series mushroom shape pop bumper cap.
Order No.05-PBR555-X (X is your color choice) to replace No.555 bulbs and No.05-PBR44-X to replace No.44 or No.47 lamps.
Simply take the pop bumper cap off, remove the old lamp, plug in the PopBlast™ board and experience an enhanced light show from your playfield.
PopBlast™ is a 70mm outer diameter ring with 21 SMD (surface mount device) LEDs mounted to the perimeter that adds flare to any translucent pop bumper cap.
The module runs on 6.3 volts AC or DC making it suitable for any manufacturer's machine.
The current consumption of .152 amps and power consumption of .96 watts is about 40% less than a traditional No.555 or No.44 incandescent bulb
The module measures 70mm in diameter and is about 2mm thick.
The PCB connects to a 555 or 44/47 lamp socket base with appropriate plug and flexible wire.
Reference:
05-PBR44-G
PopBlast™ LED ring wedge green
PopBlast™ LED ring 70mm bayonet blue
Pop bumper bayonet LED pad cool white
Pop bumper bayonet LED pad green
Pop bumper bayonet LED pad red
Pop bumper wedge LED pad green
Pop bumper wedge LED pad red
PopBlast™ LED ring 70mm bayonet white
Pop bumper bayonet LED pad warm white
Pop bumper bayonet LED pad orange
Pop bumper bayonet LED pad yellow
Pop Bumper Bayonet Economy LED Pad RED
