Shop parts by
Pop bumper wedge LED pad orange
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
Comet Pinball's pop bumper LED pad light modules for pinball machine pop bumpers add pizazz to your pinball playfield.
This easy to install ORANGE / AMBERLED light board is an exciting addition to any pinball machine
Simply take the pop bumper cap off, remove the old lamp, plug in the PopBlast™ board and experience an enhanced light show from your playfield.
The top side of the pop bumper LED pad module has seven LEDs to light the cap, and four LEDs to illuminate the pop bumper body.
The module runs on 6.3 volts AC or DC making it suitable for any manufacturer's machine.
The current consumption of .152 amps and power consumption of .96 watts is about 40% less than a traditional No.555 or No.44 incandescent bulb
The PCB connects to a wedge / 555 lamp socket base with appropriate plug and flexible wire.
05-PB555-O
Pop bumper bayonet LED pad blue
Pop Bumper Bayonet Economy LED Pad BLUE
Pop Bumper Bayonet Economy LED Pad RED
Pop Bumper Bayonet Economy LED Pad VIOLET
Pop bumper bayonet LED pad green
Pop bumper bayonet LED pad orange
Pop bumper bayonet LED pad red
Pop bumper bayonet LED pad violet
Pop bumper bayonet LED pad cool white
Pop bumper bayonet LED pad warm white
Pop bumper bayonet LED pad yellow
Pop bumper wedge LED pad blue
Pop bumper wedge LED pad green
Pop bumper wedge LED pad red
Pop bumper wedge LED pad violet
PopBlast™ LED ring 70mm bayonet blue
PopBlast™ LED ring 70mm bayonet green
PopBlast™ LED ring 70mm bayonet white
PopBlast™ LED ring wedge green
PopBlast™ LED ring wedge white
