Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Standard pinball playfield tempered glass.
Cabinet flipper leaf switch assembly for most non-solid state flipper circuits.
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Common solenoid coil with no diode.
Common solenoid coil used on many manufacturers pinball machines.
Black plastic cashbox used in most solid state pinball machines
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
Coil stop assembly used in flipper assemblies (500-5944-XX) in Sega/Stern games.
Pin-Buddy™ combo kit
Leg - 30-1/2 inch black textured
Spring - compression pop bumper 10A-7
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Shaker motor kit Stern SPIKE system
Pinball Event Tune-Up Kit
Standard pop bumper base
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
Pin-Buddy™ Game Saver Cantraption&tm 45°
Hole guard - switch slot 1-1/4 inch
E-63 switch with micro roller. REPLACES the 180-5119-00 and 180-5119-01
Sega / Data East / Stern Playfield black plastic playfield glass support R...
Flat washer used in ball shoooter assemblies .390 x .625 x .059 inch.
Glass corner protectors - Set of 2
White 3 inch molded flipper with a 2-2/16 inch shaft...
Coil - solenoid flipper Stern no diode
Sega/DE/Stern Lift Trim is 26-1/16 inch long with 3/16 inch channel.
Williams/Bally pop bumper plunger. Reference: 02-3406-1 2A-340...
Plunger and link assembly for Data East/ Sega / Stern flipper assemblies.
Flipper bushing DE/Sega/Stern 1/4 inch ID notched
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
Node board 48 volt 8 driver Stern SPIKE 2
Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.
Guard - shooter lane Stern
Spring used on relay for VUK and Lazer Kicker.
E-clip or e-ring commonly used on many 3/16" mechanism shafts
2.69 inch overall length coil sleeve with 0.187 inch shoulder.
Right plunger, link and crank (pawl) assembly used on all new Stern1 games...
Normally Closed EOS (end-of-stroke) leaf switch used in Stern flipper a...
Vertical Up Kicker (VUK) sub-mini snap action microswitch
Pin-Buddy™ Game Saver Cantraption™ 180°
Data East\Stern pop bumper body.Substitute for 03-7443-5.
Flipper return spring for DE/Sega/Stern flipper assemblies. Reference:...
4 ohm speaker 8 inch round
Standard pinball playfield Invisiglass.
Coil support bracket.
Shielded 4 inch diameter speaker - 8 ohm 4 watt.
NVRAM replacement for 6116, 6264 RAM ICs
FUSE - SLOW BLOW 8 amp 250 V (6.3x32mm) - Box of 5 All slow blow (s...
Black rubber push-in plug bumper with 1 inch diameter
Machine screw with 6-32 thread and 3/8 inch long with phillips pan head.
Nylon coil sleeve
Metal cash box lid with handle for 545-5090-00 plastic cashbox.
AC power on/off black plastic rocker switch used on late model Stern games
Powder coat black side rail for new Stern pinball machines. Fits left or...
Trim playfield glass 20-3/8 x 1/2 inches Sega
Slingshot arm assembly for Stern, Sega, Data East and other games...
USE 237-5883-00
LED lamp #44 base white dual chip
Metal yoke used in Data East, Sega, and Stern pop bumper assemblies.
Opto transmitter board SPIKE
