Filter by Category

STRANGER THINGS LE Pinball

Stern STRANGER THINGS LIMTED EDITION

The following parts are also known to work in STRANGER THINGS LE Pinball .

Sort by:

Page size:

1 2 3 4 5 6

-Ball 1-1/16 inch standard pinball

Ball 1-1/16 inch standard pinball

Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball

-Ball 1-1/16 in, Standard Pinball, 5-Pack Tube

Ball 1-1/16 in, Standard Pinball, 5-Pack Tube

Standard carbon steel 1-1/16" diameter, 80 gram pinball

-Glass playfield 21 x 43 x 3/16 inch standard

Glass playfield 21 x 43 x 3/16 inch standard

Standard pinball playfield tempered glass.

-Switch - flipper cabinet normally open

Switch - flipper cabinet normally open

Cabinet flipper leaf switch assembly for most non-solid state flipper circuits.

-Ring and rod

Pop bumper (jet bumper, thumper bumper) ring and rod assembly.

-Coil - solenoid no diode

Coil - solenoid no diode

Common solenoid coil with no diode.

-Cashbox - black plastic

Cashbox - black plastic

Black plastic cashbox used in most solid state pinball machines

-Coil stop assembly Stern

Coil stop assembly Stern

Coil stop assembly used in flipper assemblies (500-5944-XX) in Sega/Stern games.

-Pin-Buddy™ combo kit

Pin-Buddy™ combo kit

Pin-Buddy™ combo kit

-Leg - 30-1/2 inch black textured

Leg - 30-1/2 inch black textured

Leg - 30-1/2 inch black textured

-Spring - compression pop bumper 10A-7

Spring - compression pop bumper 10A-7

Spring - compression pop bumper 10A-7

-Spring - barrel compression 3/4" shooter

Spring - barrel compression 3/4" shooter

Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...

-Pinball Event Tune-Up Kit

Pinball Event Tune-Up Kit

Pinball Event Tune-Up Kit

-Shaker motor kit Stern SPIKE system

Shaker motor kit Stern SPIKE system

Shaker motor kit Stern SPIKE system

-Hole guard - switch slot 1-1/4 inch

Hole guard - switch slot 1-1/4 inch

Hole guard - switch slot 1-1/4 inch

-Pop bumper base

Pop bumper base

Standard pop bumper base

-Pin-Buddy™ Game Saver Cantraption™ 45°

Pin-Buddy™ Game Saver Cantraption™ 45°

Pin-Buddy™ Game Saver Cantraption&tm 45°

-Spring washer 1/2 inch inner diameter

Spring washer 1/2 inch inner diameter

Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...

-Switch - micro roller actuator

Switch - micro roller actuator

E-63 switch with micro roller. REPLACES the 180-5119-00 and 180-5119-01

-Side rail plastic glass channel Sega/DE/Stern 42-5/8 inch

Side rail plastic glass channel Sega/DE/Stern 42-5/8 inch

Sega / Data East / Stern Playfield black plastic playfield glass support R...

-Glass corner protectors - Set of 2

Glass corner protectors - Set of 2

Glass corner protectors - Set of 2

-Washer .390 x .625 x .059 inch shooter

Washer .390 x .625 x .059 inch shooter

Flat washer used in ball shoooter assemblies .390 x .625 x .059 inch.

-Ball shooter assembly Stern green spring

Ball shooter assembly Stern green spring

#500-6146-00-04

Complete shooter assembly includes housing, shooter rod, inner green spring.

-Flipper & shaft - generic WHITE

Flipper & shaft - generic WHITE

#515-5133-08-06

White 3 inch molded flipper with a 2-2/16 inch shaft...

-Coil - solenoid flipper Stern no diode

Coil - solenoid flipper Stern no diode

Coil - solenoid flipper Stern no diode

-Lamp socket - Wedge base

Lamp socket - Wedge base

Lamp socket with bracket holds wedge based bulbs such as #555

-Lift trim 26 inch black plastic 3/16 inch channel

Lift trim 26 inch black plastic 3/16 inch channel

Sega/DE/Stern Lift Trim is 26-1/16 inch long with 3/16 inch channel.

-Reflector - spotlight lamp

Reflector - spotlight lamp

Mini spotlight reflector cover for lamp socket assemblies

-Plunger - pop bumper

Plunger - pop bumper

Williams/Bally pop bumper plunger. Reference: 02-3406-1 2A-340...

-Flipper bushing 1/4 inch ID notched

Flipper bushing 1/4 inch ID notched

Flipper bushing DE/Sega/Stern 1/4 inch ID notched

-Node board 48 volt 8 driver Stern SPIKE

Node board 48 volt 8 driver Stern SPIKE

Node board 48 volt 8 driver Stern SPIKE 2

-Flipper plunger, link & crank assy, left

Flipper plunger, link & crank assy, left

Left plunger, link and crank (pawl) assembly used on all new Stern1 games

-Ball shooter rod 7-5/8 inch black knob

Ball shooter rod 7-5/8 inch black knob

Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.

-Guard - shooter lane Stern

Guard - shooter lane Stern

Guard - shooter lane Stern

-Spring - compression 1-1/2"

Spring - compression 1-1/2"

Spring used on relay for VUK and Lazer Kicker.

-E-clip for 3/16" shaft 20A-8712-18

E-clip for 3/16" shaft 20A-8712-18

E-clip or e-ring commonly used on many 3/16" mechanism shafts

-Coil sleeve - 2.69 inch with flange

Coil sleeve - 2.69 inch with flange

2.69 inch overall length coil sleeve with 0.187 inch shoulder.

-Flipper plunger, link & crank assy, right.

Flipper plunger, link & crank assy, right.

Right plunger, link and crank (pawl) assembly used on all new Stern1 games...

-Switch - end of stroke Stern

Switch - end of stroke Stern

Normally Closed EOS (end-of-stroke) leaf switch used in Stern flipper a...

-Pin-Buddy™ Game Saver Cantraption™ 180°

Pin-Buddy™ Game Saver Cantraption™ 180°

Pin-Buddy™ Game Saver Cantraption™ 180°

-Pushbutton - no spring red

Pushbutton - no spring red

Pushbutton - no spring. Replaces B-12273-4.

-Pop bumper body - Data East/Stern

Pop bumper body - Data East/Stern

Data East\Stern pop bumper body.Substitute for 03-7443-5.

-Speaker 8 inch - 4 ohm woofer

Speaker 8 inch - 4 ohm woofer

4 ohm speaker 8 inch round

-Spring - extension flipper return

Spring - extension flipper return

Flipper return spring for DE/Sega/Stern flipper assemblies. Reference:...

-Invisiglass playfield 21 x 43 x 3/16 inch standard

Invisiglass playfield 21 x 43 x 3/16 inch standard

Standard pinball playfield Invisiglass.

-Motor - shaker (041-5029-01) RoHS

Motor - shaker (041-5029-01) RoHS

Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...

-Bracket - coil front

Bracket - coil front

Coil support bracket.

-Speaker 4 inch - 8 ohm 4 watt shielded

Speaker 4 inch - 8 ohm 4 watt shielded

Shielded 4 inch diameter speaker - 8 ohm 4 watt.

-FUSE - SLOW BLOW 8 amp (6.3 x 32mm)

FUSE - SLOW BLOW 8 amp (6.3 x 32mm)

FUSE - SLOW BLOW 8 amp 250 V (6.3x32mm) - Box of 5 All slow blow (s...

-Bumper - rubber 1 inch diameter

Bumper - rubber 1 inch diameter

Black rubber push-in plug bumper with 1 inch diameter

-Machine Screw 6-32 x 3/8" p-ph

Machine Screw 6-32 x 3/8" p-ph

Machine screw with 6-32 thread and 3/8 inch long with phillips pan head.

-Coil sleeve - 1-15/16 inch long with 1/4 inch flange

Coil sleeve - 1-15/16 inch long with 1/4 inch flange

Nylon coil sleeve

-Switch - rocker on/off

Switch - rocker on/off

AC power on/off black plastic rocker switch used on late model Stern games

-Cashbox lid - metal with handle

Cashbox lid - metal with handle

Metal cash box lid with handle for 545-5090-00 plastic cashbox.

-Side rail - Stern black no button guard

Side rail - Stern black no button guard

Powder coat black side rail for new Stern pinball machines. Fits left or...

-Trim playfield glass 20-3/8 x 1/2 inches

Trim playfield glass 20-3/8 x 1/2 inches

Trim playfield glass 20-3/8 x 1/2 inches Sega

-Slingshot arm & tip assembly

Slingshot arm & tip assembly

Slingshot arm assembly for Stern, Sega, Data East and other games...

-Screw 6-32 x 1-3/16 inch spiral fin shank

Screw 6-32 x 1-3/16 inch spiral fin shank

USE 237-5883-00

For Reference

-Glass playfield bundle

Glass playfield bundle

#660-5001-00-BUNDLE

Glass playfield bundle.

-2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle

2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle

#60-000001-01-BUNDLE

2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle

1 2 3 4 5 6