Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Coil sleeve (plastic tubing) is the most commonly used size on all machines.
Standard pinball playfield tempered glass.
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Commonly used pop bumper skirt, or wafer, used in all contemporary machines
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
Common solenoid coil with no diode.
Black plastic cashbox used in most solid state pinball machines
Coil stop assembly used in flipper assemblies (500-5944-XX) in Sega/Stern games.
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Universal fit black rubber tip for use on all ball shooter rods.
Plunger and link assembly for many Williams/Bally and other manufacturer p...
Data East / Sega / Stern flipper solenoid coil with diode.
Pin-Buddy™ combo kit
Spring - compression pop bumper 10A-7
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Rubber grommet used on many Vertical Up Kicker (VUK) and Knocker assemblies.
Shaker motor kit Stern SPIKE system
Pinball Event Tune-Up Kit
Standard pop bumper base
Pin-Buddy™ Game Saver Cantraption&tm 45°
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
USE 77-PCR
090-5001-00/0T common solenoid coil used on many manufacturers pinball machines
Elastic Stop Nut used on rod and ring (A-4754) assemblies.
Machine screw 6-32 thread x 1/4 inch long with phillips head and external tooth lock washer
Hole guard - switch slot 1-1/4 inch
E-63 switch with micro roller. REPLACES the 180-5119-00 and 180-5119-01
Sega / Data East / Stern Playfield black plastic playfield glass support R...
Flat washer used in ball shoooter assemblies .390 x .625 x .059 inch.
Glass corner protectors - Set of 2
Fits shaft diameter of 3/8 inch with groove diameter of 5/16 inch.
E-clip or e-ring commonly used on many mechanisms. 20A-8712-25 270-5002-00
Complete shooter assembly includes housing, shooter rod, inner green spring.
Machine Screw 6-32 x 3/8" long phillips pan head with external tooth lockw...
White 3 inch molded flipper with a 2-2/16 inch shaft...
Standard snap-in Nyliner® bearing bushing with 1/4 inch Inner Diameter
Sega/DE/Stern Lift Trim is 26-1/16 inch long with 3/16 inch channel.
Elastic stop nut used on the thumper bumper brackets and other mechanisms.
Williams/Bally pop bumper plunger. Reference: 02-3406-1 2A-340...
Plunger and link assembly for Data East/ Sega / Stern flipper assemblies.
Flipper bushing DE/Sega/Stern 1/4 inch ID notched
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
Node board 48 volt 8 driver Stern SPIKE 2
Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.
Guard - shooter lane Stern
Spring used on relay for VUK and Lazer Kicker.
E-clip or e-ring commonly used on many 3/16" mechanism shafts
New single flipper button cabinet switch assembly with the new low-arcing.
Right plunger, link and crank (pawl) assembly used on all new Stern1 games...
Normally Closed EOS (end-of-stroke) leaf switch used in Stern flipper a...
Vertical Up Kicker (VUK) sub-mini snap action microswitch
Pin-Buddy™ Game Saver Cantraption™ 180°
Data East\Stern pop bumper body.Substitute for 03-7443-5.
Flipper return spring for DE/Sega/Stern flipper assemblies. Reference:...
4 ohm speaker 8 inch round
Standard pinball playfield Invisiglass.
Shielded 4 inch diameter speaker - 8 ohm 4 watt.
PAL nut 5/8 inch. Replaces 02-3000 & 240-5003-01
