Standard pinball playfield tempered glass.
Coil sleeve (plastic tubing) is the most commonly used size on all machines.
Cabinet flipper leaf switch assembly for most non-solid state flipper circuits.
2-3/16 x 1/2 inch coil sleeve. Replaces 545-5388-00
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
Common solenoid coil with no diode.
Black plastic cashbox used in most solid state pinball machines
Coil stop assembly used in flipper assemblies (500-5944-XX) in Sega/Stern games.
Standard flipper rubber 0.5 x 1.5 in ID, black...
Plunger and link assembly for many Williams/Bally and other manufacturer p...
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Pin-Buddy™ combo kit
FUSE - SLOW BLOW 5 amp 250 V (6.3x32mm) - Box of 5 All slow blow (s...
Rubber grommet used on many Vertical Up Kicker (VUK) and Knocker assemblies.
Standard pop bumper base
Shaker motor kit Stern SPIKE system
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
Pin-Buddy™ Game Saver Cantraption&tm 45°
Sega / Data East / Stern Playfield black plastic playfield glass support R...
Flat washer used in ball shoooter assemblies .390 x .625 x .059 inch.
E-clip or e-ring commonly used on many mechanisms. 20A-8712-25 270-5002-00
Glass corner protectors - Set of 2
Pinball Event Tune-Up Kit
White 3 inch molded flipper with a 2-2/16 inch shaft...
Nylon coil sleeve, 1-7/8 inch long with 3/16 inch flange.
Sega/DE/Stern Lift Trim is 26-1/16 inch long with 3/16 inch channel.
Elastic stop nut used on the thumper bumper brackets and other mechanisms.
Williams/Bally pop bumper plunger. Reference: 02-3406-1 2A-340...
Flipper bushing DE/Sega/Stern
Plunger and link assembly for Data East/ Sega / Stern flipper assemblies.
Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.
Guard - shooter lane Stern
Spring used on relay for VUK and Lazer Kicker.
E-clip or e-ring commonly used on many 3/16" mechanism shafts
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
Node board 48 volt 8 driver Stern SPIKE 2
5/8 inch chrome finish barrel lock are keyed alike with 1 inch cam and mounting nut
Normally Closed EOS (end-of-stroke) leaf switch used in Stern flipper a...
Vertical Up Kicker (VUK) sub-mini snap action microswitch
Pin-Buddy™ Game Saver Cantraption™ 180°
Data East\Stern pop bumper body.Substitute for 03-7443-5.
Flipper return spring for DE/Sega/Stern flipper assemblies. Reference:...
Shielded 4 inch diameter speaker - 8 ohm 4 watt.
5/8 inch diameter ball is used in many arcade and pitch & bat baseball games.
4 ohm speaker 8 inch round
Coil support bracket.
Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...
FUSE - SLOW BLOW 8 amp 250 V (6.3x32mm) - Box of 5 All slow blow (s...
Black rubber push-in plug bumper with 1 inch diameter
Insider Connected™ upgrade kit for Stern Pinball PREMIUM and LE SPIKE 2 system pinball machines.
Machine screw with 6-32 thread and 3/8 inch long with phillips pan head.
Machine screw 8-32 x 3/8 inch phillips pan head.
Nylon coil sleeve
Standard pinball playfield Invisiglass.
Metal cash box lid with handle for 545-5090-00 plastic cashbox.
AC power on/off black plastic rocker switch used on late model Stern games
Powder coat black side rail for new Stern pinball machines. Fits left or...
#6-32 x 1-3/16 inch steel spiral fin shank screw used to secure pop bumper bra...
Metal yoke used in Data East, Sega, and Stern pop bumper assemblies.