Insider Connected™ upgrade kit for Stern Pinball Pro SPIKE 2 system pinball machines.
Coil sleeve (plastic tubing) is the most commonly used size on all machines.
Standard pinball playfield tempered glass.
Cabinet flipper leaf switch assembly for most non-solid state flipper circuits.
2-3/16 x 1/2 inch coil sleeve. Replaces 545-5388-00
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
Common solenoid coil with no diode.
Black plastic cashbox used in most solid state pinball machines
Coil stop assembly used in flipper assemblies (500-5944-XX) in Sega/Stern games.
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Standard flipper rubber 0.5 x 1.5 in ID, black...
Plunger and link assembly for many Williams/Bally and other manufacturer p...
Pin-Buddy™ combo kit
Leg - 30-1/2 inch black textured
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Rubber grommet used on many Vertical Up Kicker (VUK) and Knocker assemblies.
FUSE - SLOW BLOW 5 amp 250 V (6.3x32mm) - Box of 5 All slow blow (s...
Shaker motor kit Stern SPIKE system
Standard pop bumper base
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
Pin-Buddy™ Game Saver Cantraption&tm 45°
090-5001-00/0T common solenoid coil used on many manufacturers pinball machines
Elastic Stop Nut used on rod and ring (A-4754) assemblies.
USE 77-PCR
Pinball Event Tune-Up Kit
Sega / Data East / Stern Playfield black plastic playfield glass support R...
Flat washer used in ball shoooter assemblies .390 x .625 x .059 inch.
Complete shooter assembly includes housing, shooter rod, inner green spring.
Glass corner protectors - Set of 2
Machine Screw 6-32 x 3/8" long phillips pan head with external tooth lockw...
White 3 inch molded flipper with a 2-2/16 inch shaft...
Nylon coil sleeve, 1-7/8 inch long with 3/16 inch flange.
Sega/DE/Stern Lift Trim is 26-1/16 inch long with 3/16 inch channel.
Elastic stop nut used on the thumper bumper brackets and other mechanisms.
Mini spotlight reflector cover for lamp socket assemblies
Williams/Bally pop bumper plunger. Reference: 02-3406-1 2A-340...
Flipper bushing DE/Sega/Stern 1/4 inch ID notched
Plunger and link assembly for Data East/ Sega / Stern flipper assemblies.
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.
Guard - shooter lane Stern
Spring used on relay for VUK and Lazer Kicker.
E-clip or e-ring commonly used on many 3/16" mechanism shafts
Node board 48 volt 8 driver Stern SPIKE 2
Yellow 3 inch molded flipper and shaft assembly with 2-3/16 inch (55mm) shaft...
Right plunger, link and crank (pawl) assembly used on all new Stern1 games...
Normally Closed EOS (end-of-stroke) leaf switch used in Stern flipper a...
Pushbutton - no spring. Replaces B-12273-4.
5/8 inch chrome finish barrel lock are keyed alike with 1 inch cam and mounting nut
Pin-Buddy™ Game Saver Cantraption™ 180°
Data East\Stern pop bumper body.Substitute for 03-7443-5.
IRON MAIDEN PRO (Stern) Pinball Machine
Newton ball and stud
Shielded 4 inch diameter speaker - 8 ohm 4 watt.
4 ohm speaker 8 inch round
Coil support bracket.
Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...
Standard pinball playfield Invisiglass.
Black rubber push-in plug bumper with 1 inch diameter
