Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Coil sleeve (plastic tubing) is the most commonly used size on all machines.
Standard pinball playfield tempered glass.
Cabinet flipper leaf switch assembly for most non-solid state flipper circuits.
2-3/16 x 1/2 inch coil sleeve. Replaces 545-5388-00
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Commonly used pop bumper skirt, or wafer, used in all contemporary machines
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
Common compression spring used on flippers, pop bumper, ball kickers, ball poppers.
Black plastic cashbox used in most solid state pinball machines
Coil stop assembly used in flipper assemblies (500-5944-XX) in Sega/Stern games.
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Pin-Buddy™ combo kit
Leg - 30-1/2 inch black textured
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Rubber grommet used on many Vertical Up Kicker (VUK) and Knocker assemblies.
Pinball Event Tune-Up Kit
Standard pop bumper base
Pin-Buddy™ Game Saver Cantraption&tm 45°
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
Elastic Stop Nut used on rod and ring (A-4754) assemblies.
Hole guard - switch slot 1-1/4 inch
E-63 switch with micro roller. REPLACES the 180-5119-00 and 180-5119-01
Sega / Data East / Stern Playfield black plastic playfield glass support R...
Glass corner protectors - Set of 2
Machine Screw 6-32 x 3/8" long phillips pan head with external tooth lockw...
White 3 inch molded flipper with a 2-2/16 inch shaft...
Standard snap-in Nyliner® bearing bushing with 1/4 inch Inner Diameter
Sega/DE/Stern Lift Trim is 26-1/16 inch long with 3/16 inch channel.
Elastic stop nut used on the thumper bumper brackets and other mechanisms.
Williams/Bally pop bumper plunger. Reference: 02-3406-1 2A-340...
Plunger and link assembly for Data East/ Sega / Stern flipper assemblies.
Flipper bushing DE/Sega/Stern 1/4 inch ID notched
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
Node board 48 volt 8 driver Stern SPIKE 2
Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.
Guard - shooter lane Stern
Spring used on relay for VUK and Lazer Kicker.
E-clip or e-ring commonly used on many 3/16" mechanism shafts
Lamp socket fits #44 and #47 lamps. Staple down style with lugs.
Right plunger, link and crank (pawl) assembly used on all new Stern1 games...
Normally Closed EOS (end-of-stroke) leaf switch used in Stern flipper a...
Vertical Up Kicker (VUK) sub-mini snap action microswitch
Pin-Buddy™ Game Saver Cantraption™ 180°
Data East\Stern pop bumper body.Substitute for 03-7443-5.
Flipper return spring for DE/Sega/Stern flipper assemblies. Reference:...
4 ohm speaker 8 inch round
Standard pinball playfield Invisiglass.
Coil support bracket.
Shielded 4 inch diameter speaker - 8 ohm 4 watt.
Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...
Mini-mars red plastic cylindrical dome with screw tabs. Reference:...
PAL nut 5/8 inch. Replaces 02-3000 & 240-5003-01
Black rubber push-in plug bumper with 1 inch diameter
Nut with 10-32 thread and elastic stop top (esn) 238-1306-00
Steel and zinc 3-prong tee nut. 8-32 tee
Nylon coil sleeve
Pushbutton 1-3/8 inch clear
Metal cash box lid with handle for 545-5090-00 plastic cashbox.
