Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Rubber - flipper 1/2 inch wide x 1-1/2 inch red
Standard pinball playfield tempered glass.
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Coil stop assembly used in flipper assemblies (500-5944-XX) in Sega/Stern games.
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Pin-Buddy™ combo kit
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Rubber grommet used on many Vertical Up Kicker (VUK) and Knocker assemblies.
Optional Shaker Motor assembly for late model Stern pinball machines.
Pinball Event Tune-Up Kit
Pin-Buddy™ Game Saver Cantraption&tm 45°
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
USE 77-PCR
E-63 switch with micro roller. REPLACES the 180-5119-00 and 180-5119-01
Hole guard - switch slot 1-1/4 inch
Glass corner protectors - Set of 2
White 3 inch molded flipper with a 2-2/16 inch shaft...
Coil - solenoid flipper Stern no diode
Williams/Bally pop bumper plunger. Reference: 02-3406-1 2A-340...
Plunger and link assembly for Data East/ Sega / Stern flipper assemblies.
Flipper bushing DE/Sega/Stern 1/4 inch ID notched
Opto transceiver assembly. Replaces 500-6775-00
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.
Guard - shooter lane Stern
Spring used on relay for VUK and Lazer Kicker.
Lamp socket fits #44 and #47 lamps. Staple down style with lugs.
Slingshot assembly leaf switch...
Right plunger, link and crank (pawl) assembly used on all new Stern1 games...
Normally Closed EOS (end-of-stroke) leaf switch used in Stern flipper a...
Pin-Buddy™ Game Saver Cantraption™ 180°
Pop bumper lamp socket with 12 inch wires.
Data East\Stern pop bumper body.Substitute for 03-7443-5.
Flipper return spring for DE/Sega/Stern flipper assemblies. Reference:...
Dual-opto receiver board assembly with grommets. Replaces 520-5174-00 without grommets
Late model Sega & post 2000 Stern pinball machines includes...
I/O Power Driver Board for new Stern S.A.M. pinball machine systems.
Standard pinball playfield Invisiglass.
Coil support bracket.
Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...
Stern power transformer.
5 volt Stern 128 x 32 red LED dot matrix display
Dual opto transmitter board assembly with grommets.
Black rubber push-in plug bumper with 1 inch diameter
Nylon coil sleeve
Pushbutton 1-3/8 inch clear
Blue plastic arrow shaped link used on many slingshot and kicker assemblies.
Slingshot arm assembly for Stern, Sega, Data East and other games...
USE 237-5883-00
Ball trough outhole enter/exit scoop Stern
Flipper crank shoulder screw 8-32 x 3/16 dia x 7/16 inch long shaft
Spring - shooter rod .035 inch green
Ball shooter housing includes housing and two 280-5010-00 Oil-lite bushing...
Nyliner® bearing 3/16 inch. Equivalent to 20-8790-1
2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle
LED display board Stern tri-color
Protect plate for many sub-mini microswitch bodies.
End-of-stroke switch actuator arm for right side flipper assembly...
