AC Power Cord - 15 foot stripped end
Kit includes a cable with connector and installation instructions (Se...
30 inch 14 pin 2 connector Data & Control ribbon cable with Display to Do...
Wire 1/4" ground braid
34 pin 3-3/4 inch long 2 connector ribbon cable used for CPU to Driver Board c...
General Illumination update cable kit for WMS WPC Games
23-1/2 inch ribbon cable with four 34 Pin connectors for Williams WPC CPU-Flip. Replaces 5795-1318-00
Cable connects the CPU board (A1-J5 connector) with the driver board.
Ribbon cable 14 pin 6-1/2 inch long with reversed connectors used on Sega & Stern pinball machines
Left and right pair hiGH flexibility wire harness assemblies for Williams ST...
New wiring harness for Williams System 3 through System 7 pinball machines
10' long 3 wire grounded AC power cord with stripped ends.
AC Power Cord - 10 foot IEC plug
Wiring harness Gottlieb System 80 - 5 inch
Eight ball trough membrane switch for Sega APOLLO 13.
Wiring harness Gottlieb System 80 A/B 3 inch
32 inch 26 pin 2 connector Display Data & Control ribbon cable.
Cable for Gottlieb System 1 CPU to Power Supply
Snap-in service outlet used in WPC games. AC inlet IEC PMT 3P. Fits into...
12 inch technician's power cord with IEC C14 3-prong male to NEMA 5-15R
Logic power cable for Williams WPC pinball machines. Reference: H-15...
26 pin 30 inch long ribbon cable 'U'
15 in long 26 pin 2 connector Data & Control ribbon cable
Set of (2) 16 pin 12 inch long ribbon cables. Connects early Stern SB-100 sound boards to MPU.
Shaker motor filter kit Stern SPIKE system
Knocker cable Bally/Williams
Wiring harness Gottlieb System 80 A/B - 7 inch long harness
EMI line filter 125/250V 6A 50/60 Hz. Replaces the 150-5000-00
Ribbon Cable - 26 pin 27 inch
Wiring harness connects Gottlieb System 80 A1 CPU board to Power Supply.
Adaptor harness - power splitter Stern 5v/12v
12 inch 34 pin 2 connector Display Data & Control ribbon cable
32 in long 14 pin 2 connector Display Data & Control ribbon cable. Replaces 5795-13434-25
20 pin 3.5 inch ribbon cable connects I/O Power Driver board to CPU/Sound board
4 piece set of ribbon cables for Bally ADDAMS FAMILY pinball machine.
Gottlieb 20 pin 3-1/2 inch ribbon connector with header plugs.
Ribbon Cable - 20 pin 9 inch
5 piece set of ribbon cables for Bally TWILIGHT ZONE pinball machine.
Cable coin door Stern SPIKE System
EMI line filter. REPLACED by 150-5016-00
Ribbon cable 26 pin 34 inc. Replaces 036-5001-26 and 036-5001-30
Ribbon Cable - 26 pin 56 inch CPU to Display
20 pin ribbon cable 18 in long
Ribbon cable tester
4 piece set of ribbon cables for Williams TERMINATOR 2 pinball machines.
Line filter-enhanced dif.att. Reference: 5102-14793-00
20 pin 12 inch ribbon cable
Ribbon Cable - 20 pin 4 inch Z
Ribbon Cable - 20 pin 7 inch ribbon A6S4 to A20J4
Wiring harness connects Gottlieb System 80 sound board to Power Supply. Gold PCB connectors.
Node board filter kit Stern SPIKE system
26 pin 19 inch long 2 connectors ribbon cable
GETAWAY (Williams) Ribbon cable kit
Ribbon Cable - 20 pin 6 inch "U" style
Ribbon Cable - 14 pin 33 inch Display to CPU/Sound board
Cable clamp 3/4 inch
ToPs Tournament (Stern) Beta Brite data cable
FLIGHT 2000 (Stern) Backbox wire harness
Center reflector lamp & cable assembly 4 pin. Black exterior and silver i...
INDIANA JONES (Williams) Ribbon cable kit
