Shop parts by
Bally Coin Door Harness
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
Reproduction early Bally solid state coin door harness. This harness comes with labeled and pre crimped wires to transfer on to your coin door. This harness includes a new service button switch, as well as instructions on what position each wire goes into the housing.
NOTE The 24 position .062 connector used to connect the coin door and cabinet harness is unavailable. You will need to transfer this piece from the original harness using a .062 pin extractor available in the related items below. In place of a missing harness or plug, a combination of available Molex connectors can be used in place of this unavailable single plug.
Reference:
BLY-CDH
Select manufacturer to view game compatibility
This is the mirror finish, vinyl peel and stick Coin Door decal.
This is the mirror finish, vinyl peel and stick Coin Door Decal with the...
For late EM & early SS Bally pinball machine coin doors & side rail fasteners.
Left and right side stainless steel trim molding for 1970's and 1980's Bally pinball machines.
Bally coin door credit pushbutton assembly.
Standard single bit 7/8" long barrel lock with chrome bezel.
Coin door trim - Bally early left USE P-5940-29_30
Stainless steel cabinet door side trim set (4 pieces).
Coin door trim - Bally early right
Coin door trim - Bally early top/bottom
Lockbar receiver Bally lever bushing
Extractor tool for the removal of .062 male and female terminals.
