Extractor Tool 0.062 inch

#77-PET62

There’s no way on earth to remove a round pin (male or female crimp terminal) from its housing without destroying it, the housing, or your hands — unless you use this tool.

It pushes the pin's locking tabs back to allow clean removal of the pin. The larger .093 inch diameter pin tool is the most commonly used on all pinball machines, while the smaller .062" pin tool is useful on early Williams solid state harness connectors.

Removes 1.57 mm (.062 inch) diameter series pin and socket male and female terminals in both plugs and receptacles.

Reference:

  • Stern 000-0310-00
  • W-HT-2032-P

0.05 lb

$24.99

In Stock