Shop parts by
Flipper Rebuild kit includes all components for Bally left and right flipper assemblies...
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
All-new replacement flipper rebuild kit is the answer for sticky, sluggish, weak, or dead flippers. Includes all mechanical components for Bally pinball machines manufactured from May 1975 through April 1980. Includes components for 2 flipper assemblies. For games that use 3 or more flippers, 2 kits are required.
This rebuild kit comes with a set of nitrile gloves to keep your hands clean and a 3mm hex wrench to tighten down the flipper bats.
Kit DOES NOT contain screws for EOS switches. Use the screws installed in your game.
Parts included in this kit
(1) A-3711-2 - Flipper crank Bally long stud right
(1) A-3711-3 - Flipper crank Bally long stud left
(2) A-613-67 - Coil stop Bally EM A-613-89
(2) 03-7811 - Leaf switch End of Stroke normally closed ASW-A20-1
(2) A-3714-3 - Plunger & link Bally A-3714-1
(2) 03-7066 - Coil sleeve
(2) 10-135 - Spring
(2) C-649-53 - Flipper bushing Bally early 0017-00042-0413
(4) 4008-01003-04 - Machine screw 8-32 x 1/4 inch p-ph-sems 232-...
(2) 4705-00002-00 - Spring washer .515 x .875 x .013 inch P-1158...
(2) P-6316-5 - E-clip for 7/32"
(1) 77-E-3MM - 3MM Allen Wrench
Reference:
BFKIT80
ASE-1587-101 flipper assembly left
ASE-1587-102 flipper assembly right
A-3711-2 flipper lever right
A-3711-3 flipper lever left
Select manufacturer to view game compatibility
Coil stop for electromechanical stepping units has9/16" on center mounti...
Bally flipper plunger & link for late electromechanical and early solid state machines. Possible replacement for ASE-2586.
Left side Flipper crank long stud for Bally EM (1975-1980)
Right side Flipper crank long stud for Bally EM (1975-1980)
Coil sleeve (plastic tubing) is the most commonly used size on all machines.
Common compression spring used on flippers, pop bumper, ball kickers, ball poppers.
Spring washer .50 x .875 inch
Machine screw 8-32 X 1/4" pan head phillips sems. Many applications. Used...
Bally flipper bushing for machines made before 1985. 1.65 inch long
Flipper end of stroke switch for electronic and electromechanical pinball machines.
E-clip for 7/32 inch
Hex wrench - 3MM
One pair of black nitrile gloves
Coil stop for electromechanical stepping units has9/16" on center mounti...
