Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Replacement MPU board for Bally or Stern coin op pinball machine
Ten-bulb box of #44 high quality miniature incandescent lamps.
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
From the makers of the ULTIMATE Bally/Stern MPU board and ULTIMATE Bally/S...
Standard pinball playfield tempered glass.
One piece molded white flipper & shaft assembly used on Bally & others.
NEW! From the makers of the world famous ULTIMATE MPU Board for pre 1984...
Connector rebuild kit for wiring harness and board headers on all Bally and SEI Stern boards
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
PinScore Premium Pinball LED Displays New PinScore™ Di...
Common compression spring used on flippers, pop bumper, ball kickers, ball poppers.
46 piece kit will completely overhaul the troublesome J1, J2, and J3 connectors on TA-100 and AS-2518-18
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
LED flicker eliminator adaptor kit Bally/Stern
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Rectifier board Bally AS-2518-18,49 / Stern TA-100
This combination set consists of 5 PINSCORE PS-2518-21 (6-digit) dis...
Pin-Buddy™ combo kit
Pinball Event Tune-Up Kit
Flipper rebuild kit for Chicago Coin Machine & Stern Electronics, Inc.
Pin-Buddy™ Game Saver Cantraption&tm 45°
Hole guard - switch slot 1-1/4 inch
Glass corner protectors - Set of 2
YOPPSICLE LED board - Warm White
One piece molded red 3 inch flipper & shaft assembly used on...
White Beehive shooter housing used in Chicago Coin, Game Plan, Gottlieb
Round credit button decal for old style Stern coin doors
Yellow pop bumper skirt, or wafer, used many manufacturers' pop bumper ass...
Flipper coil with 3 terminals and diodes for early solid state pinball machines
.100 inch 28 Position female molex housing.
1 inch tall red ribbed plastic playfield post with concentric rings desig...
Flipper coil stop used in Chicago Coin Machine & Stern Electronics, Inc.
SOLDERLESS Rectifier board Bally/Stern AS-2518-18/49 TA-100 C-464
Pin-Buddy™ Game Saver Cantraption™ 180°
Coil solenoid CCM/Stern with diode
Diode small signal switching 100V 0.3A 2-Pin DO-35
Standard pinball playfield Invisiglass.
Stern PARTS CATALOG. This 72-page Early Stern parts catalog covers both vi...
NVRAM replacement for 6116, 6264 RAM ICs
Non-popping or dead bumper body used on many electromechanical games
Coil - solenoid Chicago Coin Machine/Stern
Novelty 1-1/16 inch diameter pinball with black finish and spider web design.
Chicago Coin Machine and early Stern flipper bushing 1-1/8 inches.
SAVE $10.00 when you order both the ULTIMATE MPU and ULTIMATE TEST...
Clear plastic plexiglass High Voltage safety shield for Bally solenoid driver board
Coil - solenoid Stern USE NO-27-2300
2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle
Glass playfield bundle.
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
Flipper coil with 3 terminals and diodes for Stern early solid state games
Capacitor 0.01 uF 500 v disc
Pin-Buddy™ Game Saver Cantraption™ 45° RED
Coil - solenoid
Drop target assembly - Stern/CCM right
Pin-Buddy™ Game Saver Cantraption™ 45° Neon Green Translucent
Coil stop - Stern/CCM drop target
Spring - compression CCM/Stern flipper
Super-Band Glass Defender
Pin-Buddy™ Game Saver Cantraption™ 45° YELLOW
