Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Dot matrix display (DMD) for pinball machines
Standard carbon steel 1-1/16" diameter, 80 gram pinball
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Standard pinball playfield tempered glass.
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
Backbox latch hex key wrench tool for Data East / Sega / Stern
Ten-bulb box of #89 high quality miniature incandescent lamps.
Black plastic cashbox used in most solid state pinball machines
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
White non-wedge drop target common to most Data East, Sega, and new Stern pinball machines.
CPU/Sound Board for late model Stern pinball machines with White Star syst...
Pin-Buddy™ combo kit
USE AE-23-800-01 as an equivalent substitute
Flipper coil with diode for solid state flipper systems.
I/O Power Driver Board Revision "G" used on Sega/Stern White Star System.
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Optional Shaker Motor assembly for late model Stern pinball machines.
Pinball Event Tune-Up Kit
Hole guard - switch slot 1-1/4 inch
Pin-Buddy™ Game Saver Cantraption&tm 45°
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
Data East / Sega/ Stern flipper coil
Glass corner protectors - Set of 2
Coil - solenoid flipper Stern no diode
Sega/DE/Stern Lift Trim is 26-1/16 inch long with 3/16 inch channel.
Data East/Sega/Stern 26-1200 solenoid coil with diode
Display power supply board Whitestar/SAM
Guard - shooter lane Stern
Pin-Buddy™ Game Saver Cantraption™ 180°
USE 20-9247
Pushbutton 2" Yellow "Ball Launch"
Threaded core plug adjustable - flat top.
Dual-opto receiver board assembly with grommets. Replaces 520-5174-00 without grommets
Late model Sega & post 2000 Stern pinball machines includes...
Standard pinball playfield Invisiglass.
Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...
Dual opto transmitter board assembly with grommets.
Black mylar cabinet pivot bolt cover disc for Sega and Stern pinball machi...
Clear tempered backglass for Sega/ Stern pinball machines measures 26 x 19 x 1/8 inch
Slingshot arm assembly for Stern, Sega, Data East and other games...
U7 EPROM (Stern part #965-0200-08) for Stern White Star Sound Operating S...
Faceted crystal red pop bumper cap for Data East / Sega / Stern machines.
Glass playfield bundle.
Foam target switch pad .44 x .44 x .125 inch
2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle
24 volt relay assembly with 4 pin cable and connector. Suitable replacement for 500-6218-00
Insulation displacement style lamp socket with snap on mounting tabs
USE 500-5018-172
Opto receiver circuit board used on Sega pinball and Stern SPI pinball machines.
ToPs Tournament (Stern) Beta Brite LED sign Pinball Topper
Protect plate for many sub-mini microswitch bodies.
Flipper coil with diode for solid state flipper systems. Used on the f...
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
Pin-Buddy™ Game Saver Cantraption™ 45° RED
F20T12CW fluorescent lamp used in many arcade games and Stern pinball machines.
Drop target switch assembly. Replaces 180-5092-00 Previously 180-...
Bill acceptor - USA $1/5/10/20 up-stacker
9 position Insulation Displacement Connector (IDC).
