Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Dot matrix display (DMD) for pinball machines
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Standard pinball playfield tempered glass.
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
Backbox latch hex key wrench tool for Data East / Sega / Stern
Ten-bulb box of #89 high quality miniature incandescent lamps.
Common solenoid coil used on many manufacturers pinball machines.
Black plastic cashbox used in most solid state pinball machines
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Ten-bulb box of #906 High quality miniature incandescent lamp. May be replaced with 05-906W LED or 04-0912 bulbs.
CPU/Sound Board for late model Stern pinball machines with White Star syst...
Pin-Buddy™ combo kit
Flipper coil with diode for solid state flipper systems.
USE AE-23-800-01 as an equivalent substitute
Leg - 30-1/2 inch black textured
I/O Power Driver Board Revision "G" used on Sega/Stern White Star System.
Pinball Event Tune-Up Kit
Pin-Buddy™ Game Saver Cantraption&tm 45°
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
USE 77-PCR
Hole guard - switch slot 1-1/4 inch
Data East / Sega/ Stern flipper coil
Glass corner protectors - Set of 2
Coil - solenoid flipper Stern no diode
Transistor N channel 100v 20a Mosfet TO-220 110-0088-00
Data East/Sega/Stern 26-1200 solenoid coil with diode
Display power supply board Whitestar/SAM
Guard - shooter lane Stern
MOSFET transistor driver N channel 100V - 0.07 ohm - 22A
Integrated Circuit 2K by 8 CMOS static 24 pin RAM chip. Replaces 5340-09878-00
IC - 28 pin DIP NVRAM FM1608-120
Pin-Buddy™ Game Saver Cantraption™ 180°
USE 20-9247
Dual-opto receiver board assembly with grommets. Replaces 520-5174-00 without grommets
Ribbon cable 14 pin 6-1/2 inch long with reversed connectors used on Sega & Stern pinball machines
Late model Sega & post 2000 Stern pinball machines includes...
Standard pinball playfield Invisiglass.
Coil support bracket.
NVRAM replacement for 6116, 6264 RAM ICs
Dual opto transmitter board assembly with grommets.
Data East / Sega / Stern trip coil
USE 500-5018-172
Flipper crank shoulder screw 8-32 x 3/16 dia x 7/16 inch long shaft
Ball shooter housing includes housing and two 280-5010-00 Oil-lite bushing...
1/4 inch hex spacer post - female/female 6-32 thread taps at bothe ends 3/4 inches long.
2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle
U213 PAL Integrated circuit for Sega and Stern games
Protect plate for many sub-mini microswitch bodies.
Glass playfield bundle.
Stern Test Fixture I/O adapter board 500-6108-00
Flipper base plate with self tapping screws for Stern pinball machines - right side...
Flipper coil with diode for solid state flipper systems. Used on the f...
4 position membrane switch for Stern HARLEY DAVIDSON.
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
Pin-Buddy™ Game Saver Cantraption™ 45° RED
Trough assembly - 4 ball Stern
Bill acceptor - USA $1/5/10/20 up-stacker
Plastic spacer is 1 inch tall x 3/8 inch Outer Diameter and .166 inch Inner diameter.
