Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Dot matrix display (DMD) for pinball machines
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Standard pinball playfield tempered glass.
Commonly used pop bumper skirt, or wafer, used in all contemporary machines
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
Backbox latch hex key wrench tool for Data East / Sega / Stern
Ten-bulb box of #89 high quality miniature incandescent lamps.
Common solenoid coil used on many manufacturers pinball machines.
Black plastic cashbox used in most solid state pinball machines
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Ten-bulb box of #906 High quality miniature incandescent lamp. May be replaced with 05-906W LED or 04-0912 bulbs.
White non-wedge drop target common to most Data East, Sega, and new Stern pinball machines.
CPU/Sound Board for late model Stern pinball machines with White Star syst...
Flipper coil with diode for solid state flipper systems.
USE AE-23-800-01 as an equivalent substitute
Pin-Buddy™ combo kit
Leg - 30-1/2 inch black textured
I/O Power Driver Board Revision "G" used on Sega/Stern White Star System.
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Pinball Event Tune-Up Kit
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
Pin-Buddy™ Game Saver Cantraption&tm 45°
USE 77-PCR
Wide top rollover plastic drop target for many Stern games. Target head is...
Hole guard - switch slot 1-1/4 inch
Glass corner protectors - Set of 2
Complete shooter assembly includes housing, shooter rod, inner green spring.
Fluorescent lamp starter for F-14-15-20 watt lamps. FS-22 replaces FS-2
Knocker/ kickback plunger assembly used in ball launch assembly 500-5477-01
Coil - solenoid flipper Stern no diode
Sega/DE/Stern Lift Trim is 26-1/16 inch long with 3/16 inch channel.
Data East/Sega/Stern 26-1200 solenoid coil with diode
Transistor N channel 100v 20a Mosfet TO-220 110-0088-00
Plunger and link assembly for Data East/ Sega / Stern flipper assemblies.
Display power supply board Whitestar/SAM
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.
Guard - shooter lane Stern
Integrated Circuit 2K by 8 CMOS static 24 pin RAM chip. Replaces 5340-09878-00
Data East/Sega/Stern solenoid coil 24-940 with diode on top (OT)
New single flipper button cabinet switch assembly with the new low-arcing.
Right plunger, link and crank (pawl) assembly used on all new Stern1 games...
IC - 28 pin DIP NVRAM FM1608-120
Pin-Buddy™ Game Saver Cantraption™ 180°
Data East\Stern pop bumper body.Substitute for 03-7443-5.
Dual-opto receiver board assembly with grommets. Replaces 520-5174-00 without grommets
Late model Sega & post 2000 Stern pinball machines includes...
Coil support bracket.
Standard pinball playfield Invisiglass.
Dual opto transmitter board assembly with grommets.
Black rubber push-in plug bumper with 1 inch diameter
NVRAM replacement for 6116, 6264 RAM ICs
Data East / Sega / Stern trip coil
Black mylar cabinet pivot bolt cover disc for Sega and Stern pinball machi...
Post screw hex#6 / 6-32 machine screw 2 inch long, steel zinc.
Clear tempered backglass for Sega/ Stern pinball machines measures 26 x 19 x 1/8 inch
Foam target switch pad .44 x .44 x .125 inch
Insulation displacement style lamp socket with snap on mounting tabs