Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Standard carbon steel 1-1/16" diameter, 80 gram pinball
Barrel shaped, bright finish shooter spring used on many brand...
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
3 terminal, dual winding flipper coil is used on the following games:...
Standard pinball playfield tempered glass.
Designed for non-Fliptronic® 2/1988 - 8/1991 Williams and Bally machines...
Cabinet flipper leaf switch assembly for most non-solid state flipper circuits.
Ten-bulb box of #555 high quality Eiko miniature lamps
Williams / Bally regular cabinet stainless steel lockdown bar...
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Flipper end of stroke switch for electronic and electromechanical pinball machines.
Universal Ball Shooter rod with black plastic knob. Used on all Williams /...
Nylon flipper bushing is used on Williams Pinball games
Ten-bulb box of #89 high quality miniature incandescent lamps.
Common solenoid coil with no diode.
Standard Williams / Bally battery holder with through hole circuit board mount terminals.
Williams original style white plastic pop bumper body
Flipper & shaft - Williams logo white
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
Leg bolt 3/8-16 x 2-3/4 inch acorn head 5/8 inch
Metal yoke fits all pop bumper ring and rod assemblies.
Ten-bulb box of #906 High quality miniature incandescent lamp. May be replaced with 05-906W LED or 04-0912 bulbs.
Williams chrome plated legs with 9 inch support ribs used on many System 11 and 11B...
NEW! PINSCORE Display Systems! Brilliant design makes brilliant display...
Plunger and link assembly for many Williams/Bally and other manufacturer p...
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Plastic cube style, circuit board mounted DPDT (double pole, double throw)...
Spring - barrel compression shooter black
Red transparent pop bumper cap
3/8-16 hex machine screw nut, steel & zinc 5/8 across flats
This is the standard pop bumper socket with solid flat 4" leads used in all Bal...
Williams / Bally dual contact flipper pushbutton cabinet switch
Fiber yoke fits all pop bumper ring and rod assembles.
Hairpin retaining clip used to secure shafts and studs on many mechanical assemblies.
Pin-Buddy™ combo kit
Red star post 1-1/16 inch common to late model Bally / Williams and other brand pinball machines.
Spring - barrel compression shooter brass
Spring - compression pop bumper 10A-7
Highest tension ball shooter spring available has a .042 inch wire diameter. U...
FUSE - SLOW BLOW 5 amp 250 V (6.3x32mm) - Box of 5 All slow blow (s...
Yellow wrapper 2.2 uF @ 250 volt axial lead non-polarized metalized polyester. 125-5002-00
Standard pop bumper base
Elastic Stop Nut used on rod and ring (A-4754) assemblies.
Pin-Buddy™ Game Saver Cantraption&tm 45°
AC Power Cord - 15 foot stripped end
Knocker assembly kit for Bally and Williams AE-23-800
Pop bumper bracket used on Williams / Bally machines and other brands.
Ball shooter lane feeder assembly Williams
Williams drop target opto transceiver
#8-32 top thread and #8-32 bottom thread with 5/16 inch hex collar steel/zinc.
E-clip or e-ring commonly used on many mechanisms. 20A-8712-25 270-5002-00
Common tapered style compression flipper return spring
Glass corner protectors - Set of 2
Miniature microswitch switch with 1-3/4" flat actuator.
Pinball Event Tune-Up Kit
Plunger and link assembly for pre-Fliptronic style Data East and Williams...
Williams/Bally flipper coil stop. Reference:A-12111
Hole guard - switch slot 1-1/4 inch
Compression spring used on pop bumper assemblies and others.