Shop parts by
ROLLERGAMES (Williams) Coil stop
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
Williams ROLLERGAMES upper ramp diverter coil stop bracket.
Overall length of bracket is 1-1/8in, overall width of bracket is 1in, overall depth of bracket is 1-1/16in, distance from screw hole to hole measures 1/2in, and core length is 1/2in.
Williams issued a service bulletin(linked below) to improve the ROLLERGAMES upper ramp diverter half way through its production. This replacement coil stop is produced from that revision, and is slightly shorter than the original pre-revision design. If your diverter drive has not been updated, reference B-13488 for the revised diverter plunger and link.
See Williams Service Bulletin SS64
The service bulletin calls for changing the following components to:
Solenoid - AE-26-1200
Plunger and link assembly -
Coil stop - B-13488
Spring - 10-362
Reference:
B-13488
Select manufacturer to view game compatibility
Drive link Williams
ROLLERGAMES (Williams) LED kit
Reference: 12-6911
ROLLERGAMES (Williams) Diverter drive arm
Plunger and link assembly
ROLLERGAMES (Williams) Diverter assembly
Williams ROLLERGAMES pinball machine master interconnect board
ROLLERGAMES (Williams) Drop target kit
Pin-Tek Upgraded Williams ROLLERGAMES pinball machine interconnect board
33 piece white rubber ring set for Williams ROLLERGAMES pinball machine includes...
