Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Heavy duty 3 prong grounded 15 amp 110v AC power cord replacement plug
Barrel shaped, bright finish shooter spring used on many brand...
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Standard pinball playfield tempered glass.
Standard keyed-alike single bit 7/8 inch long barrel lock with chrome bezel fi...
Backbox latch hex key wrench tool for Data East / Sega / Stern
Flipper rebuild kit for Data East May 1987 through September 1989 pinball machines, includes...
14 piece power supply connector rebuild kit fpr Data East / Williams boards
PINSCORE Display System PS-11610 for Williams and Data East pinball machines.
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Leg bolt 3/8-16 x 2-3/4 inch acorn head 5/8 inch
2-1/4 inch nylon ball shooter sleeve used on pinball machines.
This is the battery holder used on late model Stern (1998 and newer) and S...
Rectifier board Williams Sys 3-11A / Data East / Sega
Spring - barrel compression shooter black
Pin-Buddy™ combo kit
Automatic ball-launcher kicker mechanism is used on later-model Stern pinball machines
USE AE-23-800-01 as an equivalent substitute
Spring - barrel compression shooter brass
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Diagnostic Eprom for all Data East pinball CPU
Yellow wrapper 2.2 uF @ 250 volt axial lead non-polarized metalized polyester. 125-5002-00
Pinball Event Tune-Up Kit
Pin-Buddy™ Game Saver Cantraption&tm 45°
Data East / Sega coil stop bracket
Hole guard - switch slot 1-1/4 inch
Sega / Data East / Stern Playfield black plastic playfield glass support R...
Data East and early Sega plunger and crank assembly
Glass corner protectors - Set of 2
Data East / Sega / Stern flipper solenoid coil. Specifications: Wir...
Bridge rectifier CM3501 DB3501
Standard 7/8" long chrome finish barrel lock with 3 digit adjustable combination
Lamp socket fits #44 and #47 lamps. Staple down style with lugs.
Lamp socket - Bayonet base 3 terminal
Acetate instruction/score card cover 3.25 x 6 inches
White 3 inch plastic flipper with molded 2-2/16 shaft fits Data East pinball machines...
Pin-Buddy™ Game Saver Cantraption™ 180°
1/4 inch core height coil stop with 3/8 inch on center mounting holes.
Standard pinball playfield Invisiglass.
NVRAM replacement for 6116, 6264 RAM ICs
Playfield minipost with wood screw base measures 1-7/16 inch overall.
Test Fixture Williams System 9-11 lamp matrix
Power Supply board United/Williams/Data East D-8345
2 way level decal for many Data East pinball machine playfield aprons.2...
Humbucker noise filter for Data East pinball machines
2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle
Glass playfield bundle.
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
Pin-Buddy™ Game Saver Cantraption™ 45° RED
Staple-down bayonet style socket with 3 terminals compatible with...
Diode - Zener 3.9 volts 500 mw Replaces: 1N5990 and 5075-09059-00
Lamp socket - bayonet medium 1-5/8 inch bracket
Chrome acorn 6-32 cap
Data East / Sega / Stern solenoid coil. Includes new sleeve. Specifi...
28 pin DIP blank 27256 Eprom pull. Various manufacturers. Reference...
Hex post 1/2 inch length x 1/4 inch width with #6-32 tap hole.
Data East PLAYBOY 35th ANNIVERSARY pinball machine playfiled decal set
Pin-Buddy™ Game Saver Cantraption™ 45° Neon Green Translucent
