Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Dot matrix display (DMD) for pinball machines
Heavy duty 3 prong grounded 15 amp 110v AC power cord replacement plug
Barrel shaped, bright finish shooter spring used on many brand...
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Standard pinball playfield tempered glass.
Standard keyed-alike single bit 7/8 inch long barrel lock with chrome bezel fi...
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Commonly used pop bumper skirt, or wafer, used in all contemporary machines
Backbox latch hex key wrench tool for Data East / Sega / Stern
14 piece power supply connector rebuild kit fpr Data East / Williams boards
Black plastic cashbox used in most solid state pinball machines
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
Leg bolt 3/8-16 x 2-3/4 inch acorn head 5/8 inch
This is the battery holder used on late model Stern (1998 and newer) and S...
Rectifier board Williams Sys 3-11A / Data East / Sega
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
White non-wedge drop target common to most Data East, Sega, and new Stern pinball machines.
Plunger and link assembly for many Williams/Bally and other manufacturer p...
Spring - barrel compression shooter black
Coil - solenoid with diode (SA = SG)
Fiber yoke fits all pop bumper ring and rod assembles.
Compression spring used in many different assemblies. Replaces 266-500...
USE AE-23-800-01 as an equivalent substitute
Pin-Buddy™ combo kit
Spring - barrel compression shooter brass
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Diagnostic Eprom for all Data East pinball CPU
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
Pin-Buddy™ Game Saver Cantraption&tm 45°
Data East / Sega coil stop bracket
Pinball Event Tune-Up Kit
Data East / Sega/ Stern flipper coil
Sega / Data East / Stern Playfield black plastic playfield glass support R...
Data East and early Sega plunger and crank assembly
E-clip or e-ring commonly used on many mechanisms. 20A-8712-25 270-5002-00
Glass corner protectors - Set of 2
Pinball machine volume control 10K potentiometer with long shaft
Hole guard - switch slot 1-1/4 inch
Knocker/ kickback plunger assembly used in ball launch assembly 500-5477-01
Miniature switch with flat actuator lever.
Universal PPB board for all Data East / Sega / Stern 520-5021-XX boards.
Flipper bushing DE/Sega/Stern 1/4 inch ID notched
Standard 7/8" long chrome finish barrel lock with 3 digit adjustable combination
Spring used on relay for VUK and Lazer Kicker.
Integrated Circuit 2K by 8 CMOS static 24 pin RAM chip. Replaces 5340-09878-00
Slingshot assembly leaf switch...
Drop target reset assembly assembly spring.
Acetate instruction/score card cover 3.25 x 6 inches
Pushbutton - no spring. Replaces B-12273-4.
IC - 28 pin DIP NVRAM FM1608-120
Pin-Buddy™ Game Saver Cantraption™ 180°
Cabinet Leaf Single Stack Switch with gold contacts. This switch is used...
Data East\Stern pop bumper body.Substitute for 03-7443-5.
Solid yellow skirted 1 inch square target. Reference: 180-5082-06
1/4 inch core height coil stop with 3/8 inch on center mounting holes.
USE SA-23-850 as an equivalent replacement
4 ohm speaker 8 inch round
Coil support bracket.
Post - metal standoff with groove
