Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Dot matrix display (DMD) for pinball machines
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Standard pinball playfield tempered glass.
2-3/16 x 1/2 inch coil sleeve. Replaces 545-5388-00
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Backbox latch hex key wrench tool for Data East / Sega / Stern
Ten-bulb box of #89 high quality miniature incandescent lamps.
Common solenoid coil used on many manufacturers pinball machines.
Black plastic cashbox used in most solid state pinball machines
Coil stop assembly used in flipper assemblies (500-5944-XX) in Sega/Stern games.
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Plunger and link assembly for many Williams/Bally and other manufacturer p...
Data East / Sega / Stern flipper solenoid coil with diode.
Pin-Buddy™ combo kit
Automatic ball-launcher kicker mechanism is used on later-model Stern pinball machines
USE AE-23-800-01 as an equivalent substitute
Leg - 30-1/2 inch black textured
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Rubber grommet used on many Vertical Up Kicker (VUK) and Knocker assemblies.
Pinball Event Tune-Up Kit
Pin-Buddy™ Game Saver Cantraption&tm 45°
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
USE 77-PCR
Elastic Stop Nut used on rod and ring (A-4754) assemblies.
Hole guard - switch slot 1-1/4 inch
E-63 switch with micro roller. REPLACES the 180-5119-00 and 180-5119-01
Glass corner protectors - Set of 2
Complete shooter assembly includes housing, shooter rod, inner green spring.
Fluorescent lamp starter for F-14-15-20 watt lamps. FS-22 replaces FS-2
New Stern S.A.M. system CPU / Sound board.
Data East/Sega/Stern 26-1200 solenoid coil with diode
Mini spotlight reflector cover for lamp socket assemblies
Plunger and link assembly for Data East/ Sega / Stern flipper assemblies.
Flipper bushing DE/Sega/Stern 1/4 inch ID notched
Opto transceiver assembly. Replaces 500-6775-00
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.
Guard - shooter lane Stern
Spring used on relay for VUK and Lazer Kicker.
Lamp socket fits #44 and #47 lamps. Staple down style with lugs.
Yellow 3 inch molded flipper and shaft assembly with 2-3/16 inch (55mm) shaft...
Slingshot assembly leaf switch...
Right plunger, link and crank (pawl) assembly used on all new Stern1 games...
Normally Closed EOS (end-of-stroke) leaf switch used in Stern flipper a...
Pin-Buddy™ Game Saver Cantraption™ 180°
Pop bumper lamp socket with 12 inch wires.
Data East\Stern pop bumper body.Substitute for 03-7443-5.
Dual-opto receiver board assembly with grommets. Replaces 520-5174-00 without grommets
I/O Power Driver Board for new Stern S.A.M. pinball machine systems.
Standard pinball playfield Invisiglass.
Coil support bracket.
Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...
Dual opto transmitter board assembly with grommets.
Black rubber push-in plug bumper with 1 inch diameter
Machine screw 8-32 X 1/4" pan head phillips sems. Many applications. Used...
Playfield minipost with wood screw base measures 1-7/16 inch overall.
Nylon coil sleeve
Post screw hex#6 / 6-32 machine screw 2 inch long, steel zinc.
AC power on/off black plastic rocker switch used on late model Stern games
