Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Dot matrix display (DMD) for pinball machines
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Standard pinball playfield tempered glass.
Backbox latch hex key wrench tool for Data East / Sega / Stern
Ten-bulb box of #89 high quality miniature incandescent lamps.
Common solenoid coil used on many manufacturers pinball machines.
Black plastic cashbox used in most solid state pinball machines
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Pin-Buddy™ combo kit
USE AE-23-800-01 as an equivalent substitute
Leg - 30-1/2 inch black textured
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Optional Shaker Motor assembly for late model Stern pinball machines.
Pinball Event Tune-Up Kit
Pin-Buddy™ Game Saver Cantraption&tm 45°
USE 77-PCR
Hole guard - switch slot 1-1/4 inch
Glass corner protectors - Set of 2
Complete shooter assembly includes housing, shooter rod, inner green spring.
Fluorescent lamp starter for F-14-15-20 watt lamps. FS-22 replaces FS-2
This is software revision 3.1 of the 8mbit BOOTFLASH EPROM in socket U9 us...
Set of left and right side black metal side armor rails.
New Stern S.A.M. system CPU / Sound board.
Sega/DE/Stern Lift Trim is 26-1/16 inch long with 3/16 inch channel.
Data East/Sega/Stern 26-1200 solenoid coil with diode
Plunger and link assembly for Data East/ Sega / Stern flipper assemblies.
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.
Guard - shooter lane Stern
Lamp socket fits #44 and #47 lamps. Staple down style with lugs.
Right plunger, link and crank (pawl) assembly used on all new Stern1 games...
Pin-Buddy™ Game Saver Cantraption™ 180°
Threaded core plug adjustable - flat top.
I/O Power Driver Board for new Stern S.A.M. pinball machine systems.
Standard pinball playfield Invisiglass.
Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...
Playfield minipost with wood screw base measures 1-7/16 inch overall.
Post screw hex#6 / 6-32 machine screw 2 inch long, steel zinc.
Black mylar cabinet pivot bolt cover disc for Sega and Stern pinball machi...
AC power on/off black plastic rocker switch used on late model Stern games
Clear tempered backglass for Sega/ Stern pinball machines measures 26 x 19 x 1/8 inch
Foam target switch pad .44 x .44 x .125 inch
Slingshot arm assembly for Stern, Sega, Data East and other games...
Service switch assembly 4 bank Stern
Insulation displacement style lamp socket with snap on mounting tabs
Ball trough outhole enter/exit scoop Stern
Machine screw minipost with a 10-32 0.875 inch bottom thread.
Flipper crank shoulder screw 8-32 x 3/16 dia x 7/16 inch long shaft
Lower pop bumper bracket and coil assembly fits Stern, Sega, Data East
2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle
End-of-stroke switch actuator arm for right side flipper assembly...
Glass playfield bundle.
Kicker arm weld assembly.
Flipper coil with diode for solid state flipper systems. Used on the f...
Microswitch and wireform shooter lane
Ten-bulb box of #161 high quality Eiko miniature lamps. Specs:...
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
End-of-stroke switch actuator arm for left side flipper assembly.
Pin-Buddy™ Game Saver Cantraption™ 45° RED
