Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Dot matrix display (DMD) for pinball machines
Barrel shaped, bright finish shooter spring used on many brand...
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Standard pinball playfield tempered glass.
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
Backbox latch hex key wrench tool for Data East / Sega / Stern
Common solenoid coil used on many manufacturers pinball machines.
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
This is the battery holder used on late model Stern (1998 and newer) and S...
Spring - barrel compression shooter black
Pin-Buddy™ combo kit
I/O Power Driver Board Revision "G" used on Sega/Stern White Star System.
Spring - barrel compression shooter brass
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Pinball Event Tune-Up Kit
Pin-Buddy™ Game Saver Cantraption&tm 45°
Hole guard - switch slot 1-1/4 inch
Data East / Sega/ Stern flipper coil
Glass corner protectors - Set of 2
CPU/Sound Board component update kit
Transistor N channel 100v 20a Mosfet TO-220 110-0088-00
Data East/Sega/Stern 26-1200 solenoid coil with diode
Display power supply board Whitestar/SAM
MOSFET transistor driver N channel 100V - 0.07 ohm - 22A
Integrated Circuit 2K by 8 CMOS static 24 pin RAM chip. Replaces 5340-09878-00
Data East/Sega/Stern solenoid coil 24-940 with diode on top (OT)
IC - 28 pin DIP NVRAM FM1608-120
Pin-Buddy™ Game Saver Cantraption™ 180°
USE 20-9247
Ribbon cable 14 pin 6-1/2 inch long with reversed connectors used on Sega & Stern pinball machines
Dual-opto receiver board assembly with grommets. Replaces 520-5174-00 without grommets
Late model Sega & post 2000 Stern pinball machines includes...
Standard pinball playfield Invisiglass.
NVRAM replacement for 6116, 6264 RAM ICs
Dual opto transmitter board assembly with grommets.
Clear plastic playfield post or standoff is 1-1/16 inch. Replaced by 03-7542-13
Backbox lock plate common to Data East / Sega and partial late Stern
Flipper crank shoulder screw 8-32 x 3/16 dia x 7/16 inch long shaft
2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle
1/4 inch hex spacer post - female/female 6-32 thread taps at bothe ends 3/4 inches long.
U213 PAL Integrated circuit for Sega and Stern games
Glass playfield bundle.
Stern Test Fixture I/O adapter board 500-6108-00
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
Pin-Buddy™ Game Saver Cantraption™ 45° RED
Plastic spacer is 1 inch tall x 3/8 inch Outer Diameter and .166 inch Inner diameter.
Modular target switch assembly with red narrow 5/8" x 1" rectangle face
Stern mini coil 28-1050. Do not substitute for 090-5046-01.
Lamp fluorescent 24 inch tube F20T9CW
Acetate instruction/score card cover 3 x 5-1/2 inch
Stern Display Controller Board for White Star system games. Replaced by 520-5055-03
Switch with wireform. Reference: 180-5100-01 Replaces 180-5100-02.
CPU / Sound board Stern rev D
Ribbon Cable - 20 pin 4 inch Z
Hex post 1/2 inch length x 1/4 inch width with #6-32 tap hole.
Pin-Buddy™ Game Saver Cantraption™ 45° Neon Green Translucent
Relay board.
Coil - solenoid Data East/Sega/Stern USE AE-23-800-01
