Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Dot matrix display (DMD) for pinball machines
Standard carbon steel 1-1/16" diameter, 80 gram pinball
Barrel shaped, bright finish shooter spring used on many brand...
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Standard pinball playfield tempered glass.
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
Backbox latch hex key wrench tool for Data East / Sega / Stern
Common solenoid coil used on many manufacturers pinball machines.
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
This is the battery holder used on late model Stern (1998 and newer) and S...
Spring - barrel compression shooter black
Pin-Buddy™ combo kit
USE AE-23-800-01 as an equivalent substitute
Flipper coil with diode for solid state flipper systems.
I/O Power Driver Board Revision "G" used on Sega/Stern White Star System.
Spring - barrel compression shooter brass
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Rubber grommet used on many Vertical Up Kicker (VUK) and Knocker assemblies.
Pinball Event Tune-Up Kit
Hole guard - switch slot 1-1/4 inch
Pin-Buddy™ Game Saver Cantraption&tm 45°
E-63 switch with micro roller. REPLACES the 180-5119-00 and 180-5119-01
Wide top rollover plastic drop target for many Stern games. Target head is...
Glass corner protectors - Set of 2
E-clip or e-ring commonly used on many mechanisms. 20A-8712-25 270-5002-00
Data East / Sega / Stern flipper solenoid coil. Specifications: Wir...
Coil - solenoid flipper Stern no diode
CPU/Sound Board component update kit
Transistor N channel 100v 20a Mosfet TO-220 110-0088-00
Data East/Sega/Stern 26-1200 solenoid coil with diode
Display power supply board Whitestar/SAM
Lamp socket fits #44 and #47 lamps. Staple down style with lugs.
MOSFET transistor driver N channel 100V - 0.07 ohm - 22A
Integrated Circuit 2K by 8 CMOS static 24 pin RAM chip. Replaces 5340-09878-00
IC - 28 pin DIP NVRAM FM1608-120
Drop target reset assembly assembly spring.
Pin-Buddy™ Game Saver Cantraption™ 180°
USE 20-9247
Threaded core plug adjustable - flat top.
1/4 inch core height coil stop with 3/8 inch on center mounting holes.
Late model Sega & post 2000 Stern pinball machines includes...
NVRAM replacement for 6116, 6264 RAM ICs
Standard pinball playfield Invisiglass.
Coil support bracket.
Stern TWISTER magnet processor board. 520-5143-00
Playfield minipost with wood screw base measures 1-7/16 inch overall.
Clear plastic playfield post or standoff is 1-1/16 inch. Replaced by 03-7542-13
Stern trough opto board set - receiver and transmitter. Set consis...
Data East / Sega / Stern trip coil
Data East/ Sega motor - 24V, 60 Hz 11 RPM CW
Backbox lock plate common to Data East / Sega and partial late Stern
Post screw hex#6 / 6-32 machine screw 2 inch long, steel zinc.
Black mylar cabinet pivot bolt cover disc for Sega and Stern pinball machi...
Slingshot arm assembly for Stern, Sega, Data East and other games...
Glass playfield bundle.
2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle
Flipper crank shoulder screw 8-32 x 3/16 dia x 7/16 inch long shaft
Sub-miniature snap action switch with flat lever used in wiregate assembly.
