Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Dot matrix display (DMD) for pinball machines
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Standard pinball playfield tempered glass.
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
Backbox latch hex key wrench tool for Data East / Sega / Stern
Common solenoid coil used on many manufacturers pinball machines.
Black plastic cashbox used in most solid state pinball machines
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
This is the battery holder used on late model Stern (1998 and newer) and S...
Pin-Buddy™ combo kit
Flipper coil with diode for solid state flipper systems.
I/O Power Driver Board Revision "G" used on Sega/Stern White Star System.
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Pinball Event Tune-Up Kit
Pin-Buddy™ Game Saver Cantraption&tm 45°
Hole guard - switch slot 1-1/4 inch
Data East / Sega/ Stern flipper coil
Glass corner protectors - Set of 2
Coil - solenoid flipper Stern no diode
CPU/Sound Board component update kit
Transistor N channel 100v 20a Mosfet TO-220 110-0088-00
Data East/Sega/Stern 26-1200 solenoid coil with diode
Display power supply board Whitestar/SAM
MOSFET transistor driver N channel 100V - 0.07 ohm - 22A
Integrated Circuit 2K by 8 CMOS static 24 pin RAM chip. Replaces 5340-09878-00
Data East/Sega/Stern solenoid coil 24-940 with diode on top (OT)
IC - 28 pin DIP NVRAM FM1608-120
Pin-Buddy™ Game Saver Cantraption™ 180°
USE 20-9247
Threaded core plug adjustable - flat top.
Dual-opto receiver board assembly with grommets. Replaces 520-5174-00 without grommets
Ribbon cable 14 pin 6-1/2 inch long with reversed connectors used on Sega & Stern pinball machines
Standard pinball playfield Invisiglass.
Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...
NVRAM replacement for 6116, 6264 RAM ICs
Dual opto transmitter board assembly with grommets.
Clear plastic playfield post or standoff is 1-1/16 inch. Replaced by 03-7542-13
Data East / Sega / Stern trip coil
Backbox lock plate common to Data East / Sega and partial late Stern
Black mylar cabinet pivot bolt cover disc for Sega and Stern pinball machi...
Flipper crank shoulder screw 8-32 x 3/16 dia x 7/16 inch long shaft
1/4 inch hex spacer post - female/female 6-32 thread taps at bothe ends 3/4 inches long.
2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle
U213 PAL Integrated circuit for Sega and Stern games
Glass playfield bundle.
Stern Test Fixture I/O adapter board 500-6108-00
Flipper coil with diode for solid state flipper systems. Used on the f...
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
Pin-Buddy™ Game Saver Cantraption™ 45° RED
This board is REPLACED by 520-6803-00
Mylar arch cover clear
Trough assembly - 4 ball Stern
Plastic spacer is 1 inch tall x 3/8 inch Outer Diameter and .166 inch Inner diameter.
Lamp fluorescent 24 inch tube F20T9CW
Acetate instruction/score card cover 3 x 5-1/2 inch
Stern Display Controller Board for White Star system games. Replaced by 520-5055-03
Switch with wireform. Reference: 180-5100-01 Replaces 180-5100-02.
Ribbon Cable - 20 pin 4 inch Z
