PINSCORE Display Systems!
(Replaces PS-12232-P77)
Brilliant design makes brilliant displays. New PINSCORE RED LED displays for pinball machines are the best performing, most feature-packed and economical replacement systems for obsolete glass plasma digital displays.
Only (1) refurbished unit left in stock.
PS-11610 Works in all of the following Williams & Data East pinball machines:
Williams:
Late F-14 TOMCAT* main production board No. 5760-12134-00
FIRE!
BIG GUNS
SPACE STATION
CYCLONE
SWORDS OF FURY
Data East:
PLAYBOY 35th ANNIVERSARY
SECRET SERVICE
TIME MACHINE
TORPEDO ALLEY
*NOTE for F-14 TOMCAT: Two different score display boards were used in F-14 TOMCAT. The EARLY production model had 4 twist lamp socket holes in the circuit board and was labeled with the part number D-11415.
The PS-11415-F is designed to replace this EARLY system. See the link below for this part.
If your machine DOES NOT have the (4) socket holes in the display, this PS-11610 PINSCORE Display System is correct for your game.
Features:
Plug & Play installation
Adjustable brightness
Low power consumption uses only 5 volt power and no high voltage
Beautiful black matte finish
Foam light shields prevent general illumination leakage glare
Select manufacturer to view game compatibility
5 year warranty
Assembled in USA
INSTALLATION:
1. Unplug the AC power from your pinball machine. Remove game backglass. Unplug all display board connecting cables and remove original display board.
2. Mount the new board. Hand-tighten the screws so that you may align the displays with the backglass windows before finally securing the board. If further alignment is necessary, you may adjust the insert panel door hinges and latch in the backbox.
3. Connect the cables. Not all connectors are used on all games. The 2 connectors labeled EXTERNAL DISPLAY are NOT used in the PS-11610 system . The ribbon cable goes to the connector labeled J2. The power connectors are keyed to prevent incorrect alignment. Ribbon cables are not keyed and it is possible to mis-align the connector. Observe correct polarity on all ribbon cables - the red striped wires on all ribbon cables go to PIN No.1 (also labeled as RED) on all boards.
4. Double-check all connections, plug in the machine, and turn the game on. The LED’s will light up. Pressing the diagnostic pushbutton labeled SEGMENT TEST on the PS-11610 board will illuminate all segments of all displays. This indicates that all components of the PINSCORE System are operating correctly. The thumbwheel BRIGHTNESS CONTROL allows you to set your preferred illumination level.
Reference:
UDN7180A
5760-12134-00
D-12232
D-12232-1
D-11610
![[SET] PINSCORE Display System DE/Williams 11AB](https://www.datocms-assets.com/137938/1741197264-pinscore-11610.jpg?w=640&h=640&auto=format&fit=fill&q=80)
