Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Coil sleeve (plastic tubing) is the most commonly used size on all machines.
Standard pinball playfield tempered glass.
Cabinet flipper leaf switch assembly for most non-solid state flipper circuits.
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Commonly used pop bumper skirt, or wafer, used in all contemporary machines
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
Common solenoid coil used on many manufacturers pinball machines.
Black plastic cashbox used in most solid state pinball machines
Coil stop assembly used in flipper assemblies (500-5944-XX) in Sega/Stern games.
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Plunger and link assembly for many Williams/Bally and other manufacturer p...
Fiber yoke fits all pop bumper ring and rod assembles.
Leg - 30-1/2 inch black textured
Spring - compression pop bumper 10A-7
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Rubber grommet used on many Vertical Up Kicker (VUK) and Knocker assemblies.
Standard pop bumper base
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
Elastic Stop Nut used on rod and ring (A-4754) assemblies.
Sega / Data East / Stern Playfield black plastic playfield glass support R...
Fits shaft diameter of 3/8 inch with groove diameter of 5/16 inch.
E-clip or e-ring commonly used on many mechanisms. 20A-8712-25 270-5002-00
Machine Screw 6-32 x 3/8" long phillips pan head with external tooth lockw...
Standard snap-in Nyliner® bearing bushing with 1/4 inch Inner Diameter
Coil - solenoid flipper Stern no diode
Elastic stop nut used on the thumper bumper brackets and other mechanisms.
Williams/Bally pop bumper plunger. Reference: 02-3406-1 2A-340...
Plunger and link assembly for Data East/ Sega / Stern flipper assemblies.
Flipper bushing DE/Sega/Stern 1/4 inch ID notched
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
Node board 48 volt 8 driver Stern SPIKE 2
Guard - shooter lane Stern
Spring used on relay for VUK and Lazer Kicker.
E-clip or e-ring commonly used on many 3/16" mechanism shafts
Yellow 3 inch molded flipper and shaft assembly with 2-3/16 inch (55mm) shaft...
New single flipper button cabinet switch assembly with the new low-arcing.
Normally Closed EOS (end-of-stroke) leaf switch used in Stern flipper a...
Data East\Stern pop bumper body.Substitute for 03-7443-5.
Flipper return spring for DE/Sega/Stern flipper assemblies. Reference:...
4 ohm speaker 8 inch round
Late model Sega & post 2000 Stern pinball machines includes...
Standard pinball playfield Invisiglass.
Coil support bracket.
Shielded 4 inch diameter speaker - 8 ohm 4 watt.
Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...
Black rubber push-in plug bumper with 1 inch diameter
Machine screw 8-32 X 1/4" pan head phillips sems. Many applications. Used...
Machine screw 8-32 x 3/8 inch phillips pan head.
New double stack leaf switch assembly. Replaces 180-5164-00 & 180-5164-01
Nylon coil sleeve
Metal cash box lid with handle for 545-5090-00 plastic cashbox.
AC power on/off black plastic rocker switch used on late model Stern games
Powder coat black side rail for new Stern pinball machines. Fits left or...
Trim playfield glass 20-3/8 x 1/2 inches Sega
Minipost - plastic clear 1 inch tall
Slingshot arm assembly for Stern, Sega, Data East and other games...
USE 237-5883-00
Metal yoke used in Data East, Sega, and Stern pop bumper assemblies.
Opto transmitter board SPIKE
