Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Standard pinball playfield tempered glass.
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Commonly used pop bumper skirt, or wafer, used in all contemporary machines
Black plastic cashbox used in most solid state pinball machines
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Data East / Sega / Stern flipper solenoid coil with diode.
Pin-Buddy™ combo kit
Spring - compression pop bumper 10A-7
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Shaker motor kit Stern SPIKE system
Pinball Event Tune-Up Kit
Standard pop bumper base
Pin-Buddy™ Game Saver Cantraption&tm 45°
090-5001-00/0T common solenoid coil used on many manufacturers pinball machines
Elastic Stop Nut used on rod and ring (A-4754) assemblies.
Machine screw 6-32 thread x 1/4 inch long with phillips head and external tooth lock washer
Hole guard - switch slot 1-1/4 inch
Sega / Data East / Stern Playfield black plastic playfield glass support R...
Glass corner protectors - Set of 2
Fits shaft diameter of 3/8 inch with groove diameter of 5/16 inch.
E-clip or e-ring commonly used on many mechanisms. 20A-8712-25 270-5002-00
White 3 inch molded flipper with a 2-2/16 inch shaft...
Sega/DE/Stern Lift Trim is 26-1/16 inch long with 3/16 inch channel.
Williams/Bally pop bumper plunger. Reference: 02-3406-1 2A-340...
Node board 48 volt 8 driver Stern SPIKE 2
Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.
Guard - shooter lane Stern
Spring used on relay for VUK and Lazer Kicker.
E-clip or e-ring commonly used on many 3/16" mechanism shafts
New single flipper button cabinet switch assembly with the new low-arcing.
Vertical Up Kicker (VUK) sub-mini snap action microswitch
Pin-Buddy™ Game Saver Cantraption™ 180°
4 ohm speaker 8 inch round
Standard pinball playfield Invisiglass.
Coil support bracket.
Shielded 4 inch diameter speaker - 8 ohm 4 watt.
Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...
Machine screw 8-32 x 3/8 inch phillips pan head.
Metal cash box lid with handle for 545-5090-00 plastic cashbox.
AC power on/off black plastic rocker switch used on late model Stern games
Foam target switch pad .44 x .44 x .125 inch
AGC & MDL 1-1/4" x 1/4" standard fuse holder with knurled cap 205-5001-00
USE 237-5883-00
Metal yoke used in Data East, Sega, and Stern pop bumper assemblies.
Opto transmitter board SPIKE
Node board CPU Stern SPIKE II 60hz
Flipper crank shoulder screw 8-32 x 3/16 dia x 7/16 inch long shaft
Trim - plastic channel 26 inch top & side DE/Sega/Stern
Opto receiver board SPIKE
Backbox panel Stern SPIKE 2 display/speaker
2 PACK Invisiglass playfield 21x43x3/16 inch standard Bundle
Protect plate for many sub-mini microswitch bodies.
End-of-stroke switch actuator arm for right side flipper assembly...
Glass playfield bundle.
LED display board Stern single
Coin door assembly Stern SPIKE System
Playfield bubble level with 6-1/2 degree markings
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
