Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Heavy duty 3 prong grounded 15 amp 110v AC power cord replacement plug
Barrel shaped, bright finish shooter spring used on many brand...
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Rubber - flipper 1/2 inch wide x 1-1/2 inch red
3 terminal, dual winding flipper coil is used on the following games:...
Standard pinball playfield tempered glass.
Standard keyed-alike single bit 7/8 inch long barrel lock with chrome bezel fi...
Designed for non-Fliptronic® 2/1988 - 8/1991 Williams and Bally machines...
Replaced by 77-PCR
Common compression spring used on flippers, pop bumper, ball kickers, ball poppers.
Key hook used on most coin door interiors.
Standard pinball machine leg leveler with 3/8 inch -16 thread and 3 inch long shaft
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
Slingshot switch used on many brands of electronic pinball machine kicker. Replaces SW-1A-114.
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Williams chrome plated legs with 9 inch support ribs used on many System 11 and 11B...
Spring - barrel compression shooter black
Williams / Bally dual contact flipper pushbutton cabinet switch
Compression spring used in many different assemblies. Replaces 266-500...
Pin-Buddy™ combo kit
Spring - barrel compression shooter brass
Complete Ball Shooter assembly fits most Bally/Williams and other machines.
Yellow wrapper 2.2 uF @ 250 volt axial lead non-polarized metalized polyester. 125-5002-00
Large bore coil with sleeve used on many drop target reset assemblies...
Pin-Buddy™ Game Saver Cantraption&tm 45°
Playfield side rail plastic molding is 42-1/4"
AC Power Cord - 15 foot stripped end
Pinball Event Tune-Up Kit
Glass corner protectors - Set of 2
Plunger assembly 3.875 inches ball popper
Hole guard - switch slot 1-1/4 inch
Nyliner nylon bearing 5/16 inch inner diameter.
Plastic, 3 clip, thumper bumper body used on mid 80's Bally pinball machines. C-970-5
Lane guide - 2-1/8 inch red A-9394
PINSCORE Display Systems! Brilliant design makes brilliant displays
Elastic stop nut used on the thumper bumper brackets and other mechanisms.
Cap for vertical upkicker (VUK) ball popper assembly sits on top of A-11336 plunger...
Replacement service / diagnostics / programming Keypad for Bally 6803 System games.
6-1/2 inch speaker has 8 ohm impedance with 6 oz magnet. 6-1/4 inch diameter.
Red plastic sleeve used to cushion outhole kicker arm. Reference:...
Standard 7/8" long chrome finish barrel lock with 3 digit adjustable combination
Bally flipper coil stop for all Bally flipper assemblies (1968-1987) inclu...
Outhole kicker plate mounting
Plastic arrowhead shape slingshot plunger link.
C-Clip (C crimp fastener, retaining clip) for most ball shooter rods.
Pin-Buddy™ Game Saver Cantraption™ 180°
Flipper coil stop for 1987 Williams F-14 TOMCAT, SPACE STATION, FIRE!, BIG...
Williams plunger and link assembly with 2-1/8 inch long plunger
1/8" diameter x 7/16" length slotted spring roll pin. Reference:...
Standard pinball playfield Invisiglass.
4" speaker - 8 ohms piezo 50 watts. Reference: 5555-12068-00
NVRAM replacement for 6116, 6264 RAM ICs
Extension spring. Reference: 10-362
Side rail set Bally/Williams 51-5/8 inch
Williams/Bally coil stop assembly with 3/8" centerline mounting holes.
10' long 3 wire grounded AC power cord with stripped ends.
Plunger 2.0 inch ball eject & kickers A-272 2A-2364
Clear tempered backglass for late model Bally/Williams pinball machines...
.047uf Axial capacitor
