Flat Rate Shipping: $9.99+
48 Hour Shipping
CALIFORNIA WARNING: This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
31 piece red polyurethane ring kit for Bally REVENGE FROM MARS pinball machine.
Includes red polyurethane o-rings and post rubber, black rubber shooter tip, red polyurethane flipper bands and playfield placement diagram.
Reference:
UK1587-R
Modern polyurethane bumpers for pinball machines play better and last longer than traditional pinball rubber. Tested by professional pinball players and commercial operators, polyurethane is proven to reduce maintenance and increase play-ability in all pinball machines. They are engineered to maintain the same rebound, or bounce, as traditional soft 45-durometer rubber that pinball designers and professional players prefer.
INSTALLATION TIP:
When installing flipper rubber always "unload" the tip. This means after the rubber is on the flipper bat, pinch the rubber and push it towards the tip of the flipper bat to slack the tip of the rubber as much as possible. Stretch it towards the tip until you see a visible gap between the tip of the flipper bat and the rubber. It will also help to rotate all of the rings once a month or so depending on the playing time.
Polyurethane is stiffer than rubber and requires slightly more effort to install on flipper bats. Warming the bands in warm water will ease stretching the bands while sliding onto the bat.
