Shop parts by
HARRY POTTER (Jersey Jack) Titan™ Death Eater Edition
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
26 piece UV-Reactive Titan™ competition silicone ring kit for Jersey Jack HARRY POTTER pinball machines.
Includes playfield ring placement diagram.
Kit contains two black tapered sleeves and two UV-reactive sleeves to use at the Death Eater entrance at your discretion.
Glows under (UV) black lights!
Deck your game out in the colors of your favorite Dark Wizards! "That is my true mask." Show off your commitment to He Who Must Not Be Named without getting a Dark Mark burnt into your arm!
Reference:
RK3346-1
These next generation rings are made from specially formulated silicone that provides a durable, easy to clean, vibrant replacement for standard pinball rubber. Titan? Competition rings are resistant to UV light and less susceptible to drying and cracking, giving them a much longer lifespan than traditional rubber.
Important Notes:
When installing flipper rubber always "unload" the tip. This means after the rubber is on the flipper bat, pinch the rubber and push it towards the tip of the flipper bat to slack the tip of the rubber as much as possible. Stretch it towards the tip until you see a visible gap between the tip of the flipper bat and the rubber. It will also help to rotate all of the rings once a month or so depending on the playing time.
The same method can be applied to slingshot rubber as well. Just pre-stretch the ring a little bit, then put the rubber on the sling posts and then pull 2 different sides at a time, repeatedly. The object would be to make the tension across the three posts as even as possible. Also, check the post groove for sharp corners. Star posts and metal posts can have sharp edges on the grooves that cut the ?skin? of the silicone ring, leading to early failure.
Select manufacturer to view game compatibility
UV-reactive Titan silicone mini-post rubber with 23/64" or 3/8" Outer Diameter.
UV-reactive Titan™ Silicone ring - 3/16 inch ID
UV-reactive Titan™ Silicone ring - 7/16 inch ID
UV-reactive silicone o-ring with 3/4 inch (18 mm) inner diameter.
Glow in the dark silicone O-ring with 3 inch (80 mm) inner diameter.
UV-reactive TItan Silicone standard flipper ring.
Universal fit UV-reactive silicone tip for use on all ball shooter rods.
1/4 inner diameter x 7/16 inch outer diameter x 1-1/16 inch Silicone Sleeve.
UV-reactive Titan™ Silicone mini flipper 1/2 x 1 inch ID
1-1/16 inch tapered black Rubber Post
