

HALLOWEEN (Spooky) TITAN™ SILICONE RING KIT RED
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
32 piece red Titan™ competition silicone kit for Spooky Pinball HALLOWEEN pinball machine.
Includes red silicone O-ring bumpers, red post sleeves, red ball shooter tip, red flipper rubbers, red mini flipper rubbers, and playfield rubber ring sizing chart.
Reference:
RK3322-1
RK3322-2
TK3322-R
These next generation rings are made from specially formulated silicone that provides a durable, easy to clean, vibrant replacement for standard pinball rubber. Titan™ Competition rings are resistant to UV light and less susceptible to drying and cracking, giving them a much longer lifespan than traditional rubber.
Important Notes:
When installing flipper rubber always "unload" the tip. This means after the rubber is on the flipper bat, pinch the rubber and push it towards the tip of the flipper bat to slack the tip of the rubber as much as possible. Stretch it towards the tip until you see a visible gap between the tip of the flipper bat and the rubber. It will also help to rotate all of the rings once a month or so depending on the playing time.

Red silicone o-ring with 1-1/4 inches (31.8 mm) inner diameter.

Red pinball silicone o-ring with a 2 inch (50.8 mm) inner diameter

Red silicone O ring with a 2-1/2 inch (63.5mm) inner diameter.

Red silicone mini-post rubber with 23/64" or 3/8" Outer Diameter.

Titan™ Silicone ring - Red 3/16 inch ID

Red silicone o-ring with 1-3/4 inch Inner Diameter.

Red silicone O-ring with 3 inch (80 mm) inner diameter.

Titan™ Silicone sleeve red 1-1/16 inch

1/2 tall x 3/8 inch Inner Diameter red silicone bumper post sleeve

Titan™ Silicone red mini flipper 1/2 x 1 inch ID

Standard red silicone flipper band fits most flippers.

Vibrant RED Titan silicone tip for use on all ball shooter rods.