Shop parts by
4 piece set of black plastic Pinball Cabinet shields
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
4 piece set of black plastic Pinball Cabinet Shields will prevent metal pinball legs from gouging your cabinet finish and hide blemishes on your cabinet's worn artwork.
Universal size fits all makes and models of contemporary pinball machines.
Disclaimer: Do not put PINCABs directly on top of decal cabinet artwork without felt pads in between the cabinet and PINCAB. We suggest using these: Pin Cushion Felt Pad Cabinet Protectors
Installation is as easy as bolting a leg to the cabinet. The shields are sandwiched between cabinet and leg . They extend approximately 1/4 inch beyond the leg edge to give a uniform trim appearance and cover most previous cabinet scars.
Reference:
PINCAB
545-6118-00
4322-01125-44
4322-01125-40
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Universal Leg Bolt Plate with 3/8-16 threads USE 01-9296
Typically used on 1990's and newer solid state games.
Great Neck 5/8 inch box/open end wrench
Wrench - pushbutton nut socket
Socket wrench handle - dual drive ratchet 3/8 and 1/2 inch
The one wrench for all leg bolts - the 5/8 + 9/16 inch dual hinge ratcheting box combination "PinWrench"
4 piece set of RED plastic Pinball Cabinet shields
4 piece set of GREEN Sintra plastic Pinball Cabinet shields will prevent m...
4 piece set of YELLOW Sintra plastic Pinball Cabinet shields
4 piece set of clear plastic Pinball Cabinet shields
Socket wrench set 52 pc. SAE and Metric
Wrench - socket ratchet 1/4 inch
Socket wrench handle - palm ratchet 3/8 square 1/4 hex inch
Deep socket set 1/4 inch drive 9 piece METRIC
Deep socket set 1/4 inch drive 8 piece SAE
Soft drive 5/8" socket SAE
Socket wrench handle - dual drive ratchet 3/8 and 1/4 inch
Leg bolt 3/8-16 x 2-3/4 inch acorn head 5/8 inch
Case of 600 leg bolts 3/8-16 thread with 5/8 inch acorn head and 2-1/4 inch length.
3/8 Inch Drive x 5/8 Inch 6-Point Socket SAE
9/16" socket SAE
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/4 inch length.
1/2 Inch Drive x 5/8 Inch 6-Point Socket SAE
The sister of the PinWrench - the 5/8 inch reversible ratcheting combination wrench, great for leg bolts.
