Coil sleeve (plastic tubing) is the most commonly used size on all machines.
Standard pinball playfield tempered glass.
Cabinet flipper leaf switch assembly for most non-solid state flipper circuits.
2-3/16 x 1/2 inch coil sleeve. Replaces 545-5388-00
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
Common solenoid coil with no diode.
Black plastic cashbox used in most solid state pinball machines
Coil stop assembly used in flipper assemblies (500-5944-XX) in Sega/Stern games.
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Standard flipper rubber 0.5 x 1.5 in ID, black...
Plunger and link assembly for many Williams/Bally and other manufacturer p...
Pin-Buddy™ combo kit
FUSE - SLOW BLOW 5 amp 250 V (6.3x32mm) - Box of 5 All slow blow (s...
Rubber grommet used on many Vertical Up Kicker (VUK) and Knocker assemblies.
Shaker motor kit Stern SPIKE system
Pinball Event Tune-Up Kit
Standard pop bumper base
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
Pin-Buddy™ Game Saver Cantraption&tm 45°
Sega / Data East / Stern Playfield black plastic playfield glass support R...
Flat washer used in ball shoooter assemblies .390 x .625 x .059 inch.
Glass corner protectors - Set of 2
E-clip or e-ring commonly used on many mechanisms. 20A-8712-25 270-5002-00
White 3 inch molded flipper with a 2-2/16 inch shaft...
Nylon coil sleeve, 1-7/8 inch long with 3/16 inch flange.
Sega/DE/Stern Lift Trim is 26-1/16 inch long with 3/16 inch channel.
Elastic stop nut used on the thumper bumper brackets and other mechanisms.
Williams/Bally pop bumper plunger. Reference: 02-3406-1 2A-340...
Plunger and link assembly for Data East/ Sega / Stern flipper assemblies.
Flipper bushing DE/Sega/Stern 1/4 inch ID notched
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
Node board 48 volt 8 driver Stern SPIKE 2
Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.
Guard - shooter lane Stern
Spring used on relay for VUK and Lazer Kicker.
E-clip or e-ring commonly used on many 3/16" mechanism shafts
Right plunger, link and crank (pawl) assembly used on all new Stern1 games...
Normally Closed EOS (end-of-stroke) leaf switch used in Stern flipper a...
Pin-Buddy™ Game Saver Cantraption™ 180°
5/8 inch chrome finish barrel lock are keyed alike with 1 inch cam and mounting nut
ELVIRA'S HOH (Stern) Pinball Topper
Data East\Stern pop bumper body.Substitute for 03-7443-5.
Flipper return spring for DE/Sega/Stern flipper assemblies. Reference:...
4 ohm speaker 8 inch round
Standard pinball playfield Invisiglass.
Coil support bracket.
Shielded 4 inch diameter speaker - 8 ohm 4 watt.
Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...
FUSE - SLOW BLOW 8 amp 250 V (6.3x32mm) - Box of 5 All slow blow (s...
Black rubber push-in plug bumper with 1 inch diameter
Machine screw 8-32 x 3/8 inch phillips pan head.
Machine screw with 6-32 thread and 3/8 inch long with phillips pan head.
Nylon coil sleeve
Metal cash box lid with handle for 545-5090-00 plastic cashbox.
AC power on/off black plastic rocker switch used on late model Stern games
Powder coat black side rail for new Stern pinball machines. Fits left or...
Slingshot arm assembly for Stern, Sega, Data East and other games...
USE 237-5883-00
AGC & MDL 1-1/4" x 1/4" standard fuse holder with knurled cap 205-5001-00
