Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Coil sleeve (plastic tubing) is the most commonly used size on all machines.
Standard pinball playfield tempered glass.
Cabinet flipper leaf switch assembly for most non-solid state flipper circuits.
2-3/16 x 1/2 inch coil sleeve. Replaces 545-5388-00
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
Common solenoid coil with no diode.
Black plastic cashbox used in most solid state pinball machines
Coil stop assembly used in flipper assemblies (500-5944-XX) in Sega/Stern games.
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Standard flipper rubber 0.5 x 1.5 in ID, black...
Plunger and link assembly for many Williams/Bally and other manufacturer p...
Pin-Buddy™ combo kit
Leg - 30-1/2 inch black textured
Spring - compression pop bumper 10A-7
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
FUSE - SLOW BLOW 5 amp 250 V (6.3x32mm) - Box of 5 All slow blow (s...
Rubber grommet used on many Vertical Up Kicker (VUK) and Knocker assemblies.
Shaker motor kit Stern SPIKE system
Pinball Event Tune-Up Kit
Standard pop bumper base
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
Pin-Buddy™ Game Saver Cantraption&tm 45°
Sega / Data East / Stern Playfield black plastic playfield glass support R...
Flat washer used in ball shoooter assemblies .390 x .625 x .059 inch.
Glass corner protectors - Set of 2
E-clip or e-ring commonly used on many mechanisms. 20A-8712-25 270-5002-00
Nyliner nylon bearing 5/16 inch inner diameter.
White 3 inch molded flipper with a 2-2/16 inch shaft...
Coil - solenoid flipper Stern no diode
Nylon coil sleeve, 1-7/8 inch long with 3/16 inch flange.
Sega/DE/Stern Lift Trim is 26-1/16 inch long with 3/16 inch channel.
Elastic stop nut used on the thumper bumper brackets and other mechanisms.
Williams/Bally pop bumper plunger. Reference: 02-3406-1 2A-340...
Plunger and link assembly for Data East/ Sega / Stern flipper assemblies.
Flipper bushing DE/Sega/Stern 1/4 inch ID notched
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
Node board 48 volt 8 driver Stern SPIKE 2
Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.
Guard - shooter lane Stern
Spring used on relay for VUK and Lazer Kicker.
Lamp socket fits #44 and #47 lamps. Staple down style with lugs.
E-clip or e-ring commonly used on many 3/16" mechanism shafts
Right plunger, link and crank (pawl) assembly used on all new Stern1 games...
Normally Closed EOS (end-of-stroke) leaf switch used in Stern flipper a...
Pushbutton - no spring. Replaces B-12273-4.
Vertical Up Kicker (VUK) sub-mini snap action microswitch
Pin-Buddy™ Game Saver Cantraption™ 180°
5/8 inch chrome finish barrel lock are keyed alike with 1 inch cam and mounting nut
Data East\Stern pop bumper body.Substitute for 03-7443-5.
Flipper return spring for DE/Sega/Stern flipper assemblies. Reference:...
4 ohm speaker 8 inch round
Standard pinball playfield Invisiglass.
Coil support bracket.
Shielded 4 inch diameter speaker - 8 ohm 4 watt.
Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...
PAL nut 5/8 inch. Replaces 02-3000 & 240-5003-01
FUSE - SLOW BLOW 8 amp 250 V (6.3x32mm) - Box of 5 All slow blow (s...
Black rubber push-in plug bumper with 1 inch diameter
