Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Standard carbon steel 1-1/16" diameter, 80 gram pinball
Standard pinball playfield tempered glass.
Cabinet flipper leaf switch assembly for most non-solid state flipper circuits.
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Common solenoid coil with no diode.
Black plastic cashbox used in most solid state pinball machines
Coil stop assembly used in flipper assemblies (500-5944-XX) in Sega/Stern games.
Pin-Buddy™ combo kit
Leg - 30-1/2 inch black textured
Spring - compression pop bumper 10A-7
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
Pinball Event Tune-Up Kit
Shaker motor kit Stern SPIKE system
Hole guard - switch slot 1-1/4 inch
Standard pop bumper base
Pin-Buddy™ Game Saver Cantraption&tm 45°
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
E-63 switch with micro roller. REPLACES the 180-5119-00 and 180-5119-01
Sega / Data East / Stern Playfield black plastic playfield glass support R...
Glass corner protectors - Set of 2
Flat washer used in ball shoooter assemblies .390 x .625 x .059 inch.
Complete shooter assembly includes housing, shooter rod, inner green spring.
White 3 inch molded flipper with a 2-2/16 inch shaft...
Coil - solenoid flipper Stern no diode
Sega/DE/Stern Lift Trim is 26-1/16 inch long with 3/16 inch channel.
Lamp socket with bracket holds wedge based bulbs such as #555
Mini spotlight reflector cover for lamp socket assemblies
Williams/Bally pop bumper plunger. Reference: 02-3406-1 2A-340...
Flipper bushing DE/Sega/Stern 1/4 inch ID notched
Node board 48 volt 8 driver Stern SPIKE 2
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
Ball shooter rod for Capcom / Data East / Sega / Stern pinball machines.
Guard - shooter lane Stern
Spring used on relay for VUK and Lazer Kicker.
E-clip or e-ring commonly used on many 3/16" mechanism shafts
Right plunger, link and crank (pawl) assembly used on all new Stern1 games...
2.69 inch overall length coil sleeve with 0.187 inch shoulder.
Normally Closed EOS (end-of-stroke) leaf switch used in Stern flipper a...
Pin-Buddy™ Game Saver Cantraption™ 180°
Data East\Stern pop bumper body.Substitute for 03-7443-5.
4 ohm speaker 8 inch round
Flipper return spring for DE/Sega/Stern flipper assemblies. Reference:...
Standard pinball playfield Invisiglass.
Shaker and spinning disc replacement motor for Stern SAM, SPIKE, & SPIKE 2, Chicago Gaming...
Coil support bracket.
Shielded 4 inch diameter speaker - 8 ohm 4 watt.
FUSE - SLOW BLOW 8 amp 250 V (6.3x32mm) - Box of 5 All slow blow (s...
Black rubber push-in plug bumper with 1 inch diameter
Machine screw with 6-32 thread and 3/8 inch long with phillips pan head.
Nylon coil sleeve
Pushbutton 1-3/8 inch clear
AC power on/off black plastic rocker switch used on late model Stern games
Metal cash box lid with handle for 545-5090-00 plastic cashbox.
Trim playfield glass 20-3/8 x 1/2 inches Sega
Powder coat black side rail for new Stern pinball machines. Fits left or...
Slingshot arm assembly for Stern, Sega, Data East and other games...
USE 237-5883-00
Glass playfield bundle.
AGC & MDL 1-1/4" x 1/4" standard fuse holder with knurled cap 205-5001-00
