Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
Barrel shaped, bright finish shooter spring used on many brand...
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
Coil sleeve (plastic tubing) is the most commonly used size on all machines.
3 terminal, dual winding flipper coil is used on the following games:...
Standard pinball playfield tempered glass.
Designed for non-Fliptronic® 2/1988 - 8/1991 Williams and Bally machines...
Cabinet flipper leaf switch assembly for most non-solid state flipper circuits.
Ten-bulb box of #555 high quality miniature lamps
Standard 28-1/2 inch ribbed pinball machine leg with chrome plated finish for Williams...
Pop bumper (jet bumper, thumper bumper) ring and rod assembly.
Flipper end of stroke switch for electronic and electromechanical pinball machines.
Universal Ball Shooter rod with black plastic knob. Used on all Williams /...
Nylon flipper bushing is used on Williams Pinball games
High quality steel plate replaces Bally / Williams part #01-11400-1
Rear black plastic playfield glass trim molding used on most Bally/Williams games.
Common solenoid coil with no diode.
Ten-bulb box of #89 high quality miniature incandescent lamps.
Flipper return and drop target return spring
Standard Williams / Bally battery holder with through hole circuit board mount terminals.
Williams original style white plastic pop bumper body
6821 PIA 40 pin DIP used in all Williams, Bally, Stern and other solid state pinball machines.
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
Small twist-in wedge base socket for #555 wedge base lamps. Replaces 077-5007-00
Preferred replacement for TIP120, TIP122, 2N6045 and SE9302
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
Leg bolt 3/8-16 x 2-3/4 inch acorn head 5/8 inch
Metal yoke fits all pop bumper ring and rod assemblies.
Diode - 400 volts 1 amp XO-254
Ten-bulb box of #906 High quality miniature incandescent lamp. May be replaced with 05-906W LED or 04-0912 bulbs.
Williams chrome plated legs with 9 inch support ribs used on many System 11 and 11B...
Plunger and link assembly for many Williams/Bally and other manufacturer p...
Plastic cube style, circuit board mounted DPDT (double pole, double throw)...
Spring - barrel compression shooter black
3/8-16 hex machine screw nut, steel & zinc 5/8 across flats
Fiber yoke fits all pop bumper ring and rod assembles.
Pin-Buddy™ combo kit
Hairpin retaining clip used to secure shafts and studs on many mechanical assemblies.
Coil sleeve - 2-1/16 inch with 3/16 inch flange
Spring - compression pop bumper 10A-7
Spring - barrel compression shooter brass
35 a wire lead bridge rectifier 5100-09690-00
Yellow wrapper 2.2 uF @ 250 volt axial lead non-polarized metalized polyester. 125-5002-00
Pinball Event Tune-Up Kit
Standard pop bumper base
Large twist-in socket for #906 wedge base lamps.
Pin-Buddy™ Game Saver Cantraption&tm 45°
Wire gate used on early solid state Williams ball trough runway assemblies
090-5001-00/0T common solenoid coil used on many manufacturers pinball machines
Elastic Stop Nut used on rod and ring (A-4754) assemblies.
Used as plunger rest on up-kickers, knockers, pop bumper assemblies, etc.
AC Power Cord - 15 foot stripped end
Hole guard - switch slot 1-1/4 inch
Knocker assembly kit for Bally and Williams AE-23-800
Pop bumper bracket used on Williams / Bally machines and other brands.
White silicone heat sink compund in 6.5 gram tube for power transistor and...
PINSCORE Display System for TAXI & POLICE FORCE
Ball shooter lane feeder assembly Williams
New 3 bank Universal Drop Target Opto board is a one-size-fits-all, plug and play replacement.
Williams drop target opto transceiver
