Shop parts by
Stern Spike backbox lock and cam
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
5/8 black lock with a 1" cam keyed with the common H95 code key used in all Stern Pinball Spike 2 pinball machines. This is the official factory style lock from Stern.
Reference:
355-5168-00-00 Stern Pinball Spike 2 backbox lock
LKA58BK Bally/Williams pinball machine backbox lock
Select manufacturer to view game compatibility
Backbox panel hinge Stern SPIKE 2
Shielded 4 inch diameter speaker - 8 ohm 4 watt.
Backbox panel Stern SPIKE 2 display/speaker
SPIKE motor controller PCB
Node board 48 volt 8 driver Stern SPIKE 2
Cabinet node board Stern SPIKE 2
Node board turntable driver Stern SPIKE 2
USE 520-8516-00
Node board LED center lower Stern SPIKE II
Node board LED center middle Stern SPIKE II
Node board LED left upper Stern SPIKE II
Node board LCD display Villain Stern SPIKE II
Corner bracket Stern SPIKE left
Corner bracket Stern SPIKE right
Backbox panel Stern SPIKE 2 top and rear
Backbox LCD display Stern SPIKE 2
Speaker panel assembly Stern SPIKE 2
Speaker plate Stern SPIKE 2
Backbox LCD display spacer Stern SPIKE 2
Ramp Guard shooter lane Stern Spike 2
Node board LED center lower Stern SPIKE 2
Node board 48v 4 coil driver Stern SPIKE 2 node 11
USE 520-8516-00
Bottom arch, plastic, QR ready, with flasher holes Stern SPIKE 2
QR scanner Stern
Replaced by 520-1070-00-S1
Backbox bracket Stern SPIKE 2 bottom
Node board serial opto receiver Stern SPIKE II
Black lock with one key, lock washer, 1 5/8 inch cam, and screw.
