Shop parts by
MEDIEVAL MADNESS (Williams) Backglass
This product is not currently available.
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
New Williams MEDIEVAL MADNESS pinball machine backglass.
Translite to tempered glass artwork conversion.
Mirrored, multi layered digital print on tempered glass with polished corners and edges. Ready for new side and lift trim (available separately under related items below).
Reproduction glass is 3/16" in thickness.
BACKGLASS CARE RECOMMENDATIONS:
Never apply “Krylon® triple thick” or apply any additional coatings to printed backside of new glass.
Alcohol, acetone, and most ‘rattle-can’ liquids must NEVER contact the ink.
If laying a glass down on its printed back, always place on a towel or cloth.
Glass substrate is tempered and sensitive to significant hot-cold temperature shifts. Make gradual changes to ambient temperatures.
Avoid impact or scratches to the edges, such as setting the glass down on concrete.
Never allow moisture to remain on the printed backside. After several minutes, there is a risk of ink degradation.
Do not spray cleaner directly onto the printed backside. Prolonged contact with liquids may damage your glass.
If you must clean the backside (bulb dirt, etc.) wipe with a pre-dampened cloth (water or Windex).
After wiping, make sure the liquid is dried off (wipe completely dry). Do not allow moisture to remain on surface.
Glass cleaner sprayed directly on the front is OK.
Don’t let liquid cleaners seep in between the trim channels and the glass.
Reference:
31-1357-50059
Select manufacturer to view game compatibility
Bracket-opto
Williams MEDIEVAL MADNESS pinball machine bracket for divertor shaft.
Williams MEDIEVAL MADNESS pinball machine troll guard bracket.
LED lamp complete conversion kit for Williams MEDIEVAL MADNESS.
Factory original translite for Williams MEDIEVAL MADNESS.
MEDIEVAL MADNESS (Williams) Color Guard Yellow (4)
MEDIEVAL MADNESS (Williams) Coil sleeve kit
MEDIEVAL MADNESS (Williams) Pop bumper cap set
MEDIEVAL MADNESS (Williams) Post Kit
4 piece set of ribbon cables for Williams MEDIEVAL MADNESS pinball machine.
4 piece set of ribbon cables for Williams MEDIEVAL MADNESS pinball machine.
MEDIEVAL MADNESS (Williams / Chicago Gaming) Rubber WHITE
