Shop parts by
Nyliner nylon bearing 5/16 inch inner diameter.
CALIFORNIA WARNING
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
Standard snap-in Nyliner® nylon bearing with 5/16" inner diameter
Color may vary.
0.3125" shaft diameter, 0.14" long, Type 7, standard snap-in Nyliner® bearing
Used in early through 1980's Williams front bracket guide. Also used in Bally 1980's linear flipper assemblies ASE-1587-111 and ASE-1587- 112.
Reference:
Williams 20-8790-2
20A-8790-2
Bally C-537-8
Bally 0017-00042-0418
545-5485-00
Select manufacturer to view game compatibility
Plunger - linear flipper Bally/Midway No.0360-00718-00XF plunger.
This is the left crank or pawl or lever arm hub and cap assembly used in...
Right crank used in many mid 1980's Bally pinball...
Bally flipper coil stop for all Bally flipper assemblies (1968-1987) inclu...
USE 20-8790-5
Nyliner® bearing 3/16 inch. Equivalent to 20-8790-1
0.5" Shaft diameter, 0.14" long, Type 7, standard snap-in Nyliner® b...
Nyliner® bearing 3/16 inch. Equivalent to 20-8790-1
Standard snap-in Nyliner® bearing bushing with 1/4 inch Inner Diameter
