Flat Rate Shipping: $9.99+
48 Hour Shipping
CALIFORNIA WARNING: This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
24 VAC 60Hz 11 RPM motor with 5 inch leads used in many manufacturers' pinball machines. Shaft tip thickness is .15 inches.
Reference :
Williams 14-7941
Equivalent replacement of the Data East 041-5001-00 motor
Replacement for the Data East 515-5256-00 motor assembly
Rating:
the only thing wrong with this new motor is that the connecting shaft is about 3-4 mm larger in diameter than the original (Phantom of the Opera organ). That was not much of a problem though. I simply took the connecting collar on the linkage assembly and drilled its hole a little larger using a 1/4" drill bit.
